Configuration and Installation Workflows

Deployment and Installation Workflow for an On-Premises Deployment

	Command or Action	Purpose
Step 1	Read the Cisco Jabber Planning Guide located at http://www.cisco.com/c/en/us/support/unified-communications/jabber-windows/products-installation-guides-list.html.	Choose your deployment scenario. Review requirements to confirm that you meet them. Review contact sources to determine which contact source you will use.
Step 2	Configure Directory Integration for an On-Premises Deployment.
Step 3	Configure Certificates for an On-Premises Deployment.	Certificates are required for each service to which the Jabber clients connect.
Step 4	Configure Service Discovery.
Step 5	Configure a Service Profile.
Step 6	Configure IM and Presence Service for an On-Premises Deployment.
Step 7	Configure Voice and Video Communications for On-Premises Deployments.
Step 8	Complete one of the following: Configure Voicemail for an On-Premises Deployment with Cisco Unified Communications Manager Release 9.x and Later. Configure Voicemail for an On-Premises Deployment with Cisco Unified Communications Manager Release 8.6.
Step 9	Configure Conferencing for an On-Premises Deployment.
Step 10	Configure the Clients
Step 11	Install the Clients

	Command or Action	Purpose
Step 1	Read the Cisco Jabber Planning Guide located at http://www.cisco.com/c/en/us/support/unified-communications/jabber-windows/products-installation-guides-list.html.	Choose your deployment scenario. Review requirements to confirm that you meet them. Review contact sources to determine which contact source you will use.
Step 2	Configure Directory Integration for an On-Premises Deployment.
Step 3	Configure Certificates for an On-Premises Deployment.	Certificates are required for each service to which the Jabber clients connect.
Step 4	Configure Service Discovery.
Step 5	Configure a Service Profile.
Step 6	Configure Voice and Video Communications for On-Premises Deployments.
Step 7	Complete one of the following: Configure Voicemail for an On-Premises Deployment with Cisco Unified Communications Manager Release 9.x and Later. Configure Voicemail for an On-Premises Deployment with Cisco Unified Communications Manager Release 8.6.
Step 8	Configure Conferencing for an On-Premises Deployment.
Step 9	Configure Conferencing
Step 10	Configure the Clients
Step 11	Install the Clients

	Command or Action	Purpose
Step 1	Read the Cisco Jabber Planning Guide located at http://www.cisco.com/c/en/us/support/unified-communications/jabber-windows/products-installation-guides-list.html.	Choose your deployment scenario. Review requirements to confirm that you meet them. Review contact sources to determine which contact source you will use.
Step 2	Configure Directory Integration
Step 3	Set Up Certificate Validation
Step 4	Configure Service Discovery
Step 5	Configure a Service Profile
Step 6	Configure IM and Presence Service for Cloud-Based Deployments
Step 7	Configure Voice and Video Communication for Cloud-Based Deployments
Step 8	Configure Voicemail for Cloud-Based Deployments
Step 9	Configure Conferencing for a Cloud-Based Deployment Using Cisco WebEx Meeting Center
Step 10	Configure the Clients
Step 11	Install the Clients