The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document contains information about how to configure the Cisco Unified SIP Proxy system using the CLI. Use it in conjunction with the CLI Command Reference for Cisco Unified SIP Proxy Release 10.2, which lists all the CLI commands.
Cisco Unified SIP Proxy Release 10.2 utilizes both a command-line interface (CLI) and a graphical user interface (GUI).
The CLI is a text-based interface that is accessed through a Telnet or SSH session directly to the Cisco Unified SIP Proxy appliance or, via the Console through the hypervisor. Those familiar with Cisco IOS command structure and routers will see similarities.
The Cisco Unified SIP Proxy commands are structured much like the Cisco IOS CLI commands. However, the Cisco Unified SIP Proxy CLI commands do not affect Cisco IOS configurations. After you log in to Cisco Unified SIP Proxy, the command environment is no longer the Cisco IOS environment.
The CLI is accessible from a PC or server anywhere in the IP network.
Cisco Unified SIP Proxy Release 10.2 also has a GUI that is used to configure and operate the Cisco Unified SIP Proxy system.
For information on using the GUI, see the online help in the application or the GUI Configuration Guide for Cisco Unified SIP Proxy Release 10.2.
Some components of the software created for Cisco Unified SIP Proxy Release 10.2 are provided through open source or commercial licensing. These components and the associated copyright statements can be found at:
https://www.cisco.com/c/en/us/about/legal/open-source-documentation-responsive.html
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0.