Name
|
Enter a name for the directory lookup dial rule. The name can contain up to 50 alphanumeric characters and can contain any
combination of spaces, periods (.), hyphens (-), and underscore characters (_).
|
Description
|
Enter a description of the directory lookup dial rule in the Description field or leave blank. The description can include
up to 50 characters in any language, but it cannot include double-quotes ("), percentage sign (%), ampersand (&), or angle
brackets (<>).
|
Number Begins With
|
Enter the initial digits of the directory numbers to which you want to apply this directory lookup dial rule. For example,
if you enter 972, this dial rule applies to directory numbers that include 9725551212.
Valid values include numeric digits (0 through 9), plus (+), asterisk (*), and pound (#).
|
Number of Digits
|
Enter the length of the directory numbers to which you want to apply this directory lookup dial rule. For example, if you
enter 7, this dial rule applies to directory numbers including 8675309.
|
Total Digits to be Removed
|
Enter the number of digits that you want Cisco Unified Communications Manager to remove from directory numbers that apply to this dial rule. For example, if you enter 3, Cisco Unified Communications Manager removes 408 from directory numbers that include 4085556666.
Valid values for this field range from 1 to 100. The total digits to be removed cannot be more than the number of digits of
the directory numbers that apply to this directory lookup dial rule.
|
Prefix With Pattern
|
Enter the pattern to prepend to directory numbers that apply to this directory lookup dial rule. Valid values include digits
(0 through 9), plus (+), asterisk (*), and pound (#).
Note
|
If a prefix pattern is defined, the digits to be removed can equal 0. If the prefix pattern is not defined, the digits to
be removed must be greater than 0.
|
|