Transcoder Type
|
Choose the appropriate transcoder type: Cisco Media Termination Point Hardware, Cisco IOS Media Termination Point, Cisco IOS
Enhanced Media Termination Point, or Cisco Media Termination Point (WS-SVC-CMM).
For specific information on these transcoder types, see the Cisco
Unified Communications Manager System Guide.
|
Description
|
Enter a description (up to 128 characters) or leave blank to generate automatically from the MAC address or device name that
you provide.
|
Device Name
|
This field displays if you chose Cisco IOS Media Termination Point or Cisco IOS Enhanced Media Termination Point as the transcoder
type. Enter the same transcoding name that you entered in the gateway Command Line Interface (CLI).
Enter up to 15 characters. Valid characters comprise alphanumeric characters (a-z, A-Z, 0-9), as well as dot (.), dash (-),
and underscore (_).
|
Transcoder Name
|
For Cisco Media Termination Point (WS-SVC-CMM) transcoders, the system fills in this value based on the MAC address that you
provide.
|
MAC Address
|
For Cisco media termination point hardware or Cisco Media Termination Point (WS-SVC-CMM), enter a MAC address, which must
be 12 characters.
|
Subunit
|
For Cisco Media Termination Point (WS-SVC-CMM) transcoders, choose a subunit from the drop-down list box.
|
Device Pool
|
From the drop-down list box, choose a device pool. For more detailed information on the chosen device pool, click View Details.
|
Common Device Configuration
|
From the drop-down list box, choose a common device configuration. For more detailed information on the chosen common device
configuration, click View Details.
|
Special Load Information
|
Enter any special load information into the Special Load Information field or leave blank to use default. Valid characters
include letters, numbers, dashes, dots (periods), and underscores.
|
Trusted Relay Point
|
Check this check box to designate this transcoder as a trusted relay point (TRP) that Cisco Unified Communications Manager can use in a network virtualization environment.
See the Cisco
Unified Communications Manager System Guide for a discussion of trusted relay points.
|
Maximum Capacity
|
For Cisco Media Termination Point (WS-SVC-CMM) transcoders, choose a maximum capacity from the drop-down list box.
|
Product-Specific Configuration Layout
|
Model-specific configuration fields defined by the device manufacturer
|
The device manufacturer specifies the model-specific fields under product-specific configuration. Because they are dynamically
configured, they can change without notice.
To view field descriptions and help for product-specific configuration items, click the "?" information icon below the Product Specific Configuration heading to display help in a popup dialog box.
If you need more information, see the documentation for the specific device that you are configuring or contact the manufacturer.
|