- Preface
- RDMA Over Converged Ethernet (RoCE) version 2
- Configuring SMB Direct with RoCEv2 in Windows
- Configuring NVMe Over Fabrics (NVMeoF) with RoCEv2 in Linux
- Configuring NVMe on RoCEv2 with ESXi
- Using the Cisco IMC CLI to Configure the RoCEv2 Interface
- Known Issues in RoCEv2
Cisco UCS C-Series Integrated Management Controller Configuration Guide for RDMA over Converged Ethernet (RoCEv2), Release 4.2
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- July 8, 2022
Feedback