Viewing Sensors

This chapter includes the following sections:

Viewing Chassis Sensors

Viewing Power Supply Sensors

Procedure

  Command or Action Purpose

Step 1

Server# scope sensor

Enters sensor command mode.

Step 2

Server /sensor # show psu

Displays power supply sensor statistics for the server.

Step 3

Server /sensor # show psu-redundancy

Displays power supply redundancy sensor status for the server.

Example

This example displays power supply sensor statistics: 

Server# scope sensor
Server /sensor # show psu
Name          Sensor Status  Reading  Units  Min. Warning Max. Warning  Min. Failure  Max. Failure    
------------  -------------- -------- ------ ------------ ------------  ------------- ------------- 
SU1_PIN       Normal        102      Watts      N/A        882             N/A             1098            
PSU2_PIN       Normal        96       Watts      N/A       882             N/A             1098            
PSU3_PIN       Normal        102      Watts      N/A       882             N/A             1098            
PSU4_PIN       Normal        96       Watts      N/A       882             N/A             1098            
PSU1_POUT      Normal        78       Watts      N/A       798             N/A             996             
PSU2_POUT      Normal        78       Watts      N/A       798             N/A             996             
PSU3_POUT      Normal        84       Watts      N/A       798             N/A             996             
PSU4_POUT      Normal        84       Watts      N/A       798             N/A             996             
POWER_USAGE    Normal        406      Watts      N/A       N/A             N/A             2674            
PSU1_DC_OK     Normal        good                                                                                  
PSU2_DC_OK     Normal        good                                                                                  
PSU3_DC_OK     Normal        good                                                                                  
PSU4_DC_OK     Normal        good                                                                                  
PSU1_AC_OK     Normal        good                                                                                  
PSU2_AC_OK     Normal        good                                                                                  
PSU3_AC_OK     Normal        good                                                                                  
PSU4_AC_OK     Normal        good                                                                                  
PSU1_STATUS    Normal        present                                                                               
PSU2_STATUS    Normal        present                                                                               
PSU3_STATUS    Normal        present                                                                               
PSU4_STATUS    Normal        present 
                                                                             
Server /sensor # show psu-redundancy             
Name                 Reading         Sensor Status        
-------------------- --------------- -------------------- 
PS_RDNDNT_MODE       full            Normal                

Server /sensor #

Viewing Fan Sensors

Procedure

  Command or Action Purpose

Step 1

Server# scope sensor

Enters sensor command mode.

Step 2

Server /sensor # show fan [detail]

Displays fan sensor statistics for the server.

Example

This example displays fan sensor statistics: 

Server# scope sensor
Server /sensor # show fan
Name            Sensor Status  Reading    Units  Min. Warning  Max. Warning Min. Failure  Max. Failure    
--------------- -------------  ---------- ------ ------------- ------------ ------------- ------------
PSU1_FAN_SPEED   Normal         5160       RPM    1118            N/A             946       N/A             
PSU2_FAN_SPEED   Normal         6106       RPM    1118            N/A             946       N/A             
PSU3_FAN_SPEED   Normal         5762       RPM    1118            N/A             946       N/A             
PSU4_FAN_SPEED   Normal         4988       RPM    1118            N/A             946       N/A             
FAN1_SPEED       Normal         6600       RPM    2040            N/A             1800      N/A             
FAN2_SPEED       Normal         6660       RPM    2040            N/A             1800      N/A             
FAN3_SPEED       Normal         6600       RPM    2040            N/A             1800      N/A             
FAN4_SPEED       Normal         6660       RPM    2040            N/A             1800      N/A             
FAN5_SPEED       Normal         6660       RPM    2040            N/A             1800      N/A             
FAN6_SPEED       Normal         6660       RPM    2040            N/A             1800      N/A             
FAN7_SPEED       Normal         6660       RPM    2040            N/A             1800      N/A             
FAN8_SPEED       Normal         6660       RPM    2040            N/A             1800      N/A   
Server /sensor #

Viewing Current Sensors

Procedure

  Command or Action Purpose

Step 1

Server# scope sensor

Enters sensor command mode.

Step 2

Server /sensor # show current

Displays current sensor statistics.

Example

This example displays current sensor statistics: 

Server# scope sensor
Server /sensor # show current
Name        Sensor Status Reading    Units   Min. Warning Max. Warning Min. Failure Max. Failure 
----------- ------------- ---------- ------- ------------ ------------ ------------ ------------ 
PSU1_IOUT   Normal         6.00       AMP        N/A          78.00        N/A          87.00        
PSU2_IOUT   Normal         6.00       AMP        N/A          78.00        N/A          87.00        
PSU3_IOUT   Normal         7.00       AMP        N/A          78.00        N/A          87.00        
PSU4_IOUT   Normal         7.00       AMP        N/A          78.00        N/A          87.00 

Server /sensor #

Viewing Voltage Sensors

Procedure

  Command or Action Purpose

Step 1

Server# scope sensor

Enters sensor command mode.

Step 2

Server /sensor # show voltage

Displays voltage sensor statistics.

Example

This example displays voltage sensor statistics: 

Server# scope sensor
Server /sensor # show voltage
Name             Sensor Status  Reading    Units  Min. Warning Max. Warning Min. Failure Max. Failure 
---------------- -------------- ---------- ------ ------------ ------------ ------------ ------------ 
SIOC_P1V0        Normal         1.000      V          N/A          N/A          0.944        1.064        
SIOC_P1V2        Normal         1.208      V          N/A          N/A          1.128        1.272        
SIOC_P1V5        Normal         1.500      V          N/A          N/A          1.410        1.590        
SIOC_P2V5        Normal         2.478      V          N/A          N/A          2.338        2.646        
SIOC_P3V3        Normal         3.320      V          N/A          N/A          3.100        3.500        
SIOC_P12V_STBY   Normal         12.060     V          N/A          N/A          11.280       12.720       
SIOC_P3V3_STBY   Normal         3.360      V          N/A          N/A          3.140        3.460        
PSU1_VIN         Normal         228.000    V          N/A          N/A          N/A          264.000      
PSU2_VIN         Normal         228.000    V          N/A          N/A          N/A          264.000      
PSU3_VIN         Normal         228.000    V          N/A          N/A          N/A          264.000      
PSU4_VIN         Normal         228.000    V          N/A          N/A          N/A          264.000      
P5V_1            Normal         5.010      V          N/A          N/A          4.500        5.640        
P5V_2            Normal         5.010      V          N/A          N/A          4.500        5.640        
P5V_3            Normal         5.010      V          N/A          N/A          4.500        5.640        
P5V_4            Normal         5.010      V          N/A          N/A          4.500        5.640        
P0V9_EXP1_VCORE  Normal         0.872      V          N/A          N/A          0.836        0.976        
P0V9_EXP2_VCORE  Normal         0.872      V          N/A          N/A          0.836        0.976        
P0V9_EXP1_AVD    Normal         0.888      V          N/A          N/A          0.836        0.976        
P0V9_EXP2_AVD    Normal         0.904      V          N/A          N/A          0.836        0.976        
PSU1_VOUT        Normal         12.000     V          N/A          N/A          N/A          12.600       
PSU2_VOUT        Normal         12.000     V          N/A          N/A          N/A          12.600       
PSU3_VOUT        Normal         12.000     V          N/A          N/A          N/A          12.600       
PSU4_VOUT        Normal         12.000     V          N/A      
Server /sensor #

Viewing Temperature Sensors

Procedure

  Command or Action Purpose

Step 1

Server# scope sensor

Enters sensor command mode.

Step 2

Server /sensor # show temperature

Displays temperature sensor statistics.

Example

This example displays temperature sensor statistics: 

Server# scope sensor
Server /sensor # show temperature
Name               Sensor Status  Reading Units    Min. Warning Max. Warning Min. Failure Max. Failure 
------------------ -------------- ------- -------- ------------ ------------ ------------ ------------ 
SIOC1_BACK_TEMP    Normal         37.0       C          N/A          70.0         N/A          80.0         
SIOC1_FRONT_TEMP   Normal         42.0       C          N/A          70.0         N/A          80.0         
SIOC1_MID_TEMP     Normal         41.0       C          N/A          70.0         N/A          80.0         
SIOC1_VIC_TEMP     Normal         44.0       C          N/A          70.0         N/A          80.0         
SIOC2_VIC_TEMP     Normal         44.0       C          N/A          70.0         N/A          80.0         
MOBO_R_BOT_TEMP    Normal         30.0       C          N/A          70.0         N/A          80.0         
MOBO_L_BOT_TEMP    Normal         31.0       C          N/A          70.0         N/A          80.0         
MOBO_R_MID_TEMP    Normal         25.0       C          N/A          50.0         N/A          55.0         
MOBO_R_IN_TEMP     Normal         24.0       C          N/A          50.0         N/A          55.0         
MOBO_L_IN_TEMP     Normal         26.0       C          N/A          50.0         N/A          55.0         
MOBO_L_MID_TEMP    Normal         26.0       C          N/A          50.0         N/A          55.0         
MOBO_R_OUT_TEMP    Normal         29.0       C          N/A          47.0         N/A          52.0         
MOBO_L_OUT_TEMP    Normal         29.0       C          N/A          46.0         N/A          51.0         
PSU1_TEMP          Normal         24.0       C          N/A          55.0         N/A          60.0         
PSU2_TEMP          Normal         27.0       C          N/A          55.0         N/A          60.0         
PSU3_TEMP          Normal         27.0       C          N/A          55.0         N/A          60.0         
PSU4_TEMP          Normal         25.0       C          N/A          55.0         N/A          60.0         
SIOC1_CMC_TEMP     Normal         51.0       C          N/A          75.0         N/A          85.0         
MOBO_R_EXP_TEMP    Normal         37.0       C          N/A          80.0         N/A          90.0         
MOBO_L_EXP_TEMP    Normal         40.0       C          N/A          80.0         N/A          90.0         
SIOC2_BACK_TEMP    Normal         36.0       C          N/A          70.0         N/A          80.0         
SIOC2_FRONT_TEMP   Normal         36.0       C          N/A          70.0         N/A          80.0         
SIOC2_MID_TEMP     Normal         36.0       C          N/A          70.0         N/A          80.0         
SIOC2_CMC_TEMP     Normal         36.0       C          N/A          75.0         N/A          85.0    
Server /sensor #

Viewing LED Sensor

Procedure

  Command or Action Purpose

Step 1

Server# scope sensor

Enters sensor command mode.

Step 2

Server /sensor # show led

Displays LED sensor statistics.

Example

This example displays LED sensor statistics: 

Server# scope sensor
Server /sensor # show led
LED Name                  LED State  LED Color 
------------------------- ---------- -------- 
LED_FAN12_FAULT           OFF        AMBER    
LED_FAN34_FAULT           OFF        AMBER    
LED_FAN56_FAULT           OFF        AMBER    
LED_FAN78_FAULT           OFF        AMBER    
CHS_FP_LED_ID             OFF        BLUE     
LED_HLTH_STATUS           ON         GREEN    
LED_PSU_STATUS            ON         GREEN    
LED_TEMP_STATUS           ON         GREEN    
LED_FAN_STATUS            ON         GREEN    
SERVER1_FP_ID_LED         OFF        BLUE     
SERVER2_FP_ID_LED         OFF        BLUE     
OVERALL_DIMM_STATUS       ON         GREEN 
Server /sensor #

Viewing Server Sensors

Viewing Storage Sensors

Procedure

  Command or Action Purpose

Step 1

Server # scope server {1 | 2}

Enters server command mode of server 1 or 2.

Step 2

Server /server # scope sensor

Enters sensor command.

Step 3

Server /server /sensor #show hdd

Displays the storage sensors for the server.

Example

This example displays the storage sensors for the server: 

Server# scope server 1 
Server /server #scope sensor
Server /server /sensor #show hdd
Name                 Status               
-------------------- -------------------- 
SSD1_PRS             inserted             
SSD2_PRS             inserted      

 Server server /sensor #

Viewing Current Sensors

Procedure

  Command or Action Purpose

Step 1

Server # scope server {1 | 2}

Enters server command mode of server 1 or 2.

Step 2

Server /server # scope sensor

Enters sensor command.

Step 3

Server /server /sensor #show current

Displays the current sensors for the server.

Example

This example displays the current sensors for the server: 

Server# scope server 1 
Server /server #scope sensor
Server /server /sensor #show current
Name           Sensor Status  Reading  Units   Min. Warning Max. Warning Min. Failure Max. Failure 
-------------- -------------- -------- ------- ------------ ------------ ------------ ------------ 
P12V_CUR_SENS  Normal         5.84       AMP        N/A          N/A          N/A          56.90  
Server server /sensor #

Viewing LED Sensors

Procedure

  Command or Action Purpose

Step 1

Server # scope server {1 | 2}

Enters server command mode of server 1 or 2.

Step 2

Server /server # scope sensor

Enters sensor command.

Step 3

Server /server /sensor #show led

Displays the LED sensors for the server.

Example

This example displays the LED sensors for the server: 

Server# scope server 1 
Server /server #scope sensor
Server /server /sensor #show led
LED Name                  LED State  LED Color 
------------------------- ---------- -------- 
FP_ID_LED                 FAST BLINK BLUE     
P1_DIMM_A1_LED            OFF        AMBER    
P1_DIMM_A2_LED            OFF        AMBER    
P1_DIMM_B1_LED            OFF        AMBER    
P1_DIMM_B2_LED            OFF        AMBER    
P1_DIMM_C1_LED            OFF        AMBER    
P1_DIMM_C2_LED            OFF        AMBER    
P1_DIMM_D1_LED            OFF        AMBER    
P1_DIMM_D2_LED            OFF        AMBER    
P2_DIMM_E1_LED            OFF        AMBER    
P2_DIMM_E2_LED            OFF        AMBER    
P2_DIMM_F1_LED            OFF        AMBER    
P2_DIMM_F2_LED            OFF        AMBER    
P2_DIMM_G1_LED            OFF        AMBER    
P2_DIMM_G2_LED            OFF        AMBER    
P2_DIMM_H1_LED            OFF        AMBER    
P2_DIMM_H2_LED            OFF        AMBER    
LED_HLTH_STATUS           ON         GREEN    
LED_TEMP_STATUS           ON         GREEN    
OVERALL_DIMM_STATUS       ON         GREEN  
 
 Server server /sensor #

Viewing Temperature Sensors

Procedure

  Command or Action Purpose

Step 1

Server # scope server {1 | 2}

Enters server command mode of server 1 or 2.

Step 2

Server /server # scope sensor

Enters sensor command.

Step 3

Server /server /sensor #show temperature

Displays the temperature sensors for the server.

Example

This example displays the temperature sensors for the server: 

Server# scope server 1 
Server /server #scope sensor
Server /server /sensor #show temperature
Name             Sensor Status  Reading  Units    Min. Warning Max. Warning Min. Failure Max. Failure 
---------------- -------------- -------- -------- ------------ ------------ ------------ ------------ 
TEMP_SENS_FRONT  Normal         24.0       C          N/A          60.0         N/A          70.0         
TEMP_SENS_REAR   Normal         25.0       C          N/A          80.0         N/A          85.0         
P1_TEMP_SENS     Normal         21.0       C          N/A          74.0         N/A          79.0         
P2_TEMP_SENS     Normal         23.5       C          N/A          74.0         N/A          79.0         
DDR3_P1_A1_TEMP  Normal         23.0       C          N/A          65.0         N/A          85.0         
DDR3_P1_A2_TEMP  Normal         23.0       C          N/A          65.0         N/A          85.0         
DDR3_P1_B1_TEMP  Normal         23.0       C          N/A          65.0         N/A          85.0         
DDR3_P1_B2_TEMP  Normal         23.0       C          N/A          65.0         N/A          85.0         
DDR3_P1_C1_TEMP  Normal         24.0       C          N/A          65.0         N/A          85.0         
DDR3_P1_C2_TEMP  Normal         24.0       C          N/A          65.0         N/A          85.0         
DDR3_P1_D1_TEMP  Normal         24.0       C          N/A          65.0         N/A          85.0         
DDR3_P1_D2_TEMP  Normal         23.0       C          N/A          65.0         N/A          85.0         
DDR3_P2_E1_TEMP  Normal         23.0       C          N/A          65.0         N/A          85.0         
DDR3_P2_E2_TEMP  Normal         23.0       C          N/A          65.0         N/A          85.0         
DDR3_P2_F1_TEMP  Normal         22.0       C          N/A          65.0         N/A          85.0     

Server server /sensor #

Viewing Voltage Sensors

Procedure

  Command or Action Purpose

Step 1

Server # scope server {1 | 2}

Enters server command mode of server 1 or 2.

Step 2

Server /server # scope sensor

Enters sensor command.

Step 3

Server /server /sensor #show voltage

Displays the voltage sensors for the server.

Example

This example displays the voltage sensors for the server: 

Server# scope server 1 
Server /server #scope sensor
Server /server /sensor #show voltage
Name            Sensor Status  Reading  Units    Min. Warning Max. Warning Min. Failure Max. Failure 
--------------- -------------- -------- -------- ------------ ------------ ------------ ------------ 
P3V_BAT_SCALED   Normal         2.973      V          N/A          N/A          2.154        3.418        
P5V_STBY         Normal         4.909      V          N/A          N/A          4.555        5.452        
P3V3_STBY        Normal         3.302      V          N/A          N/A          3.018        3.602        
P1V1_SSB_STBY    Normal         1.088      V          N/A          N/A          1.000        1.205        
P1V8_STBY        Normal         1.784      V          N/A          N/A          1.627        1.980        
P1V0_STBY        Normal         0.990      V          N/A          N/A          0.911        1.088        
P1V5_STBY        Normal         1.490      V          N/A          N/A          1.372        1.637        
P0V75_STBY       Normal         0.725      V          N/A          N/A          0.686        0.823        
P2V5_STBY        Normal         2.484      V          N/A          N/A          2.279        2.734        
P12V             Normal         11.977     V          N/A          N/A          11.210       12.803       
P5V              Normal         5.031      V          N/A          N/A          4.680        5.335        
P3V3             Normal         3.276      V          N/A          N/A          3.089        3.526        
P1V5_SSB         Normal         1.482      V          N/A          N/A          1.412        1.607        
P1V1_SSB         Normal         1.084      V          N/A          N/A          1.037        1.178        
PVTT_P1          Normal         0.991      V          N/A          N/A          0.944        1.061        
PVTT_P2          Normal         0.975      V          N/A          N/A          0.944        1.061        
PVSA_P1          Normal         0.959      V          N/A          N/A          0.593        1.170    

Server server /sensor #