Toggling the Server Locator LED
Before you begin
You must log in with user or admin privileges to perform this task.
Procedure
Command or Action | Purpose | |
---|---|---|
Step 1 |
Server # scope server server ID |
Enters server command mode. |
Step 2 |
Server /server # set locator-led {on | off} |
Enables or disables the server locator LED. |
Step 3 |
Server /server # commit |
Commits the transaction to the system configuration. |
Example
This example disables the server locator LED and commits the transaction:
Server# scope server 1
Server /server # set locator-led off
Server /server *# commit
Server /server #