Restrictions for Switch Device Manager Template
-
The Customizable SDM Template feature isn’t supported on the C9500-12Q, C9500-16X, C9500-24Q, C9500-40X models of the Cisco Catalyst 9500 Series Switches.
-
If the device is operating with NAT template, Switch Device Manager (SDM) templates can’t be customized.
-
The combined limit for multicast entries for layer 2 and layer 3 is 48K (K = 1024 entries).
-
It's mandatory to assign a priority value to each of the features when customizing an SDM template. The priority value decides the resource allocation for the features.
-
The priority value of each feature should be unique. You can’t assign the same priority value to different features.
Note |
In case of RMA or Supervisor replacement, restoring the backup configuration doesn’t restore the customized template. You’ll have to reconfigure the customized template. |