- Configuring Bidirectional Forwarding Detection
- Configuring MSDP
- Configuring IP Unicast Routing
- Configuring RIP
- Configuring OSPF
- Configuring EIGRP
- Configuring BGP
- Implementing Multiprotocol BGP for IPv6
- Configuring IS-IS Routing
- Configuring Multi-VRF CE
- Configuring Unicast Reverse Path Forwarding
- Protocol-Independent Features
- Configuring Generic Routing Encapsulation(GRE) Tunnel IP Source and Destination VRF Membership
- Configuring Unicast and Multicast over Point-to-Multipoint GRE
- Configuring BGP Support for 4-byte ASN
- Configuring BGP Graceful Shutdown
- Configuring EIGRP MIB
- Configuring EIGRP Wide Metrics
- Configuring OSPFv3 Fast Convergence - LSA and SPF Throttling
- Configuring NSSA for OSPFv2
- Configuring OSPFv3 Authentication Trailer
- Configuring OSPFv3 BFD
- Configuring OSPFv3 External Path Preference Option
- Configuring Graceful Shutdown Support for OSPFv3
- Configuring NSSA for OSPFv3
- Configuring OSPF Retransmissions Limit
- Configuring OSPFv3 Max-Metric Router LSA
- Configuring OSPFv3 Demand Circuit Ignore
- Configuring Prefix Suppression Support for OSPFv3
Routing Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- March 30, 2018
Feedback