Information About SDM Templates
You can use SDM templates to configure the system resources to optimize support for specific features, depending on how your device is used in the network. You can select a template to provide maximum system usage for some functions.
Cisco Catalyst 9400 Series Switches support the following templates:
-
Access
-
Core
-
SDA
After you change the template and the system reboots, you can use the show sdm prefer privileged EXEC command to verify the new template configuration. If you enter the show sdm prefer command before you enter the reload privileged EXEC command, the show sdm prefer command shows the template currently in use and the template that will become active after a reload.
Resource |
Access |
---|---|
LPM |
64K |
Host |
48K |
Layer 2 Multicast |
16K |
Layer 3 Multicast |
16K |
MAC Address |
64K |
SGT |
8K |
Flexible Netflow |
128K/ASIC |
Security ACL |
18K |
QoS ACL |
18K |
PBR/NAT |
2K |
Tunnel |
1K |
LISP |
1K |
MPLS L3VPN VRF |
255 |
MPLS Label |
12K |
MPLS L3VPN Routes VRF |
32K |
MPLS L3VPN Routes Prefix |
4K |
MVPN MDT Tunnels |
1K |
L2VPN EOMPLS Attachment |
1K |
Template Name |
Access |
Core |
SDA |
---|---|---|---|
LPM |
64K |
64K |
64K |
Host |
48K |
32K |
80K |
Layer2 Multicast |
16K |
16K |
16K |
Layer3 Multicast |
16K |
32K |
16K |
MAC Address |
64K |
16K |
16K |
SGT |
8K |
8K |
8K |
Flexible Netflow |
128K/ASIC |
128K/ASIC |
128K/ASIC |
Security ACL |
18K |
18K |
18K |
QoS ACL |
18K |
18K |
18K |
PBR/NAT |
2K |
2K |
2K |
Tunnel |
1K |
1K |
1K |
LISP |
1K |
1K |
1K |
MPLS L3VPN VRF |
255 |
255 |
N/A |
MPLS Label |
12K |
16K |
|
MPLS L3VPN Routes VRF |
32K |
32K |
|
MPLS L3VPN Routes Prefix |
4K |
4K |
|
MVPN MDT Tunnels |
1K |
1K |
|
L2VPN EOMPLS Attachment |
1K |
1K |
1K |