N Commands

name-lookup

[no] name-lookup

Syntax Description

no

(Optional) Negate a command or set its defaults

name-lookup

Display OSPF router ids as DNS names
Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

name-lookup

[no] name-lookup

Syntax Description

no

(Optional) Negate a command or set its defaults

name-lookup

Enable Name Lookup for OSPF Neighbors
Command Mode
  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

name

name <name-val> | no name [ <name-val> ]

Syntax Description

no

Negate a command or set its defaults

name

Set configuration name

name-val

Configuration name
Command Mode
  • /exec/configure/spanning-tree/mst/configuration

name (hsrp_ipv6)

name [ <name> ] | no name

Syntax Description

no

Negate a command or set its defaults

name

Redundancy name string

name

(Optional) name string

Command Mode
  • /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

name (glbp)

name <redundancy-name> | no name [ <redundancy-name> ]

Syntax Description

no

Negate a command or set its defaults

name

Redundancy name

redundancy-name

Name String

Command Mode
  • /exec/configure/if-eth-any/glbp

nat destination

{ nat destination } | { no nat destination }

Syntax Description

no

Negate a command or set its defaults

nat

Network Address Translation

destination

Destination NAT
Command Mode
  • /exec/configure/itd

negotiate auto

negotiate auto | no negotiate auto

Syntax Description

no

Negate a command or set its defaults

negotiate

Configure link negotiation parameters

auto

Configure auto-negotiation
Command Mode
  • /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

neighbor-down fib-accelerate

[no] neighbor-down fib-accelerate

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor-down

Handle BGP neighbor down event, due to various reasons

fib-accelerate

Accelerate the hardware updates for IP/IPv6 adjacencies for neighbor
Command Mode
  • /exec/configure/router-bgp/vrf-cmds

neighbor

[no] neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ remote-as <asn> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor

Configure a BGP neighbor

neighbor-id

IP address of the neighbor

remote-as

(Optional) Specify Autonomous System Number of the neighbor

asn

(Optional) Autonomous System Number
Command Mode
  • /exec/configure/router-bgp

neighbor (router-bgp-vrf)

[no] neighbor { <neighbor-id> | <ipv6-neighbor-id> } [ remote-as <asn> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor

Configure a BGP neighbor

neighbor-id

IP address of the neighbor

remote-as

(Optional) Specify Autonomous System Number of the neighbor

asn

(Optional) Autonomous System Number

Command Mode
  • /exec/configure/router-bgp/router-bgp-vrf

neighbor (router-bgp)

[no] neighbor { <neighbor-prefix> | <ipv6-neighbor-prefix> } [ remote-as [ <asn> | route-map <rmap-name> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor

Configure a BGP neighbor

neighbor-prefix

IP prefix for neighbors

remote-as

(Optional) Specify Autonomous System Number of the neighbor

asn

(Optional) Autonomous System Number

route-map

(Optional) Route-map to match prefix peer AS number

rmap-name

(Optional) Route-map name

Command Mode
  • /exec/configure/router-bgp

neighbor (router-bgp-vrf)

[no] neighbor { <neighbor-prefix> | <ipv6-neighbor-prefix> } [ remote-as [ <asn> | route-map <rmap-name> ] ]

Syntax Description

no

(Optional) Negate a command or set its defaults

neighbor

Configure a BGP neighbor

neighbor-prefix

IP prefix for neighbors

remote-as

(Optional) Specify Autonomous System Number of the neighbor

asn

(Optional) Autonomous System Number

route-map

(Optional) Route-map to match prefix peer AS number

rmap-name

(Optional) Route-map name

Command Mode
  • /exec/configure/router-bgp/router-bgp-vrf

neighbor (router-eigrp-af-common)

{ { neighbor <address> { <interface> | maximum-prefix <value> [ warning-only ] } } | { no neighbor <address> [ <interface> | maximum-prefix <value> [ warning-only ] ] } } | { { neighbor maximum-prefix <value> [ <threshold> ] [ warning-only ] [ restart <time1> ] [ restart-count <count> ] [ reset-time <time2> ] [ dampened ] } | { no neighbor maximum-prefix [ <value> [ <threshold> ] [ warning-only ] [ restart <time1> ] [ restart-count <count> ] ] } }

Syntax Description

no

Negate a command or set its defaults

neighbor

Specify a neighbor router

interface

Interface

address

Neighbor address

maximum-prefix

Maximum number of IP prefixes acceptable from a neighbor

value

Number of IP prefixes for maximum-prefix limit

threshold

(Optional) Threshold value (%) at which to generate a warning message

warning-only

(Optional) Only give warning message when limit is exceeded

restart

(Optional) Duration for which a prefix source is ignored

time1

(Optional) Restart interval in minutes

restart-count

(Optional) Number of times sessions are auto-restarted

count

(Optional) Number of times

reset-time

(Optional) Duration after which restart history is cleared

time2

(Optional) Reset time in minutes

dampened

(Optional) Exponentially increase restart time interval

Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

neighbor (ldp)

neighbor [ vrf { <vrf-name> | <vrf-known-name> } ] <ipaddr> { implicit-withdraw | labels accept <pfx-list> | targeted } | no neighbor [ vrf { <vrf-name> | <vrf-known-name> } ] <ipaddr> [ implicit-withdraw | labels accept | targeted ]

Syntax Description

no

Negate a command or set its defaults

neighbor

Configure neighbor parameters

vrf

(Optional) VRF Routing/Forwarding instance information

vrf-name

(Optional) VPN Routing/Forwarding instance name

vrf-known-name

(Optional) Known VRF name

ipaddr

IP address for LDP neighbor

implicit-withdraw

Enable LDP Implicit Withdraw Label

labels

Configure label binding exchange controls

accept

Specify label bindings to accept

pfx-list

Name of prefix list

targeted

Establish targeted session

Command Mode
  • /exec/configure/ldp

net

[no] net <net>

Syntax Description

no

(Optional) Negate a command or set its defaults

net

Configure Network Entity Title for IS-IS

net

NET in form of XX.XXXX. ... .XXXX.XX
Command Mode
  • /exec/configure/otv-isis

net

[no] net <net>

Syntax Description

no

(Optional) Negate a command or set its defaults

net

Configure Network Entity Title for IS-IS

net

NET in form of XX.XXXX. ... .XXXX.XX
Command Mode
  • /exec/configure/router-isis/router-isis-vrf-common

network

[no] network { <ip-dest> <ip-mask> | <ip-prefix> }

Syntax Description

no

(Optional) Negate a command or set its defaults

network

RIP IP network

ip-dest

IP addr format

ip-mask

IP network mask format

ip-prefix

Exact prefix
Command Mode
  • /exec/configure/router-rip/router-rip-af-ipv4 /exec/configure/router-rip/router-rip-vrf-af-ipv4

network (router-bgp-vrf-af-ipv4)

[no] network { <ip-addr> mask <ip-mask> | <ip-prefix> } [ route-map <rmap-name> | summarize ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

network

Configure an IP prefix to advertise

ip-addr

IP network to advertise

mask

Configure the mask of the IP prefix to advertise

ip-mask

Dotted 4-octet mask

ip-prefix

IP prefix in CIDR format

route-map

(Optional) Apply route-map to modify attributes

rmap-name

(Optional) Route-map name

summarize

(Optional) Summarize more specific prefixes from routing table

Command Mode
  • /exec/configure/router-bgp/router-bgp-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv4

network (router-bgp-vrf-af-ipv6)

[no] network <ipv6-prefix> [ route-map <rmap-name> | summarize ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

network

Configure an IPv6 prefix to advertise

route-map

(Optional) Apply route-map to modify attributes

rmap-name

(Optional) Route-map name

summarize

(Optional) Summarize more specific prefixes from routing table

Command Mode
  • /exec/configure/router-bgp/router-bgp-af-ipv6 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

network (router-eigrp-af-ipv4)

[no] network { { <address> <mask> } | <prefix> }

Syntax Description

no

(Optional) Negate a command or set its defaults

network

Enable routing on an IP network

address

Network number

mask

EIGRP wild card bits

prefix

IP prefix in slash format

Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-ipv4

network (vrf)

[no] network { <ip-dest> <ip-mask> | <ip-prefix> } area { <area-id-ip> | <area-id-int> }

Syntax Description

no

(Optional) Negate a command or set its defaults

network

Enable routing on an IP network

ip-dest

IP prefix format: i.i.i.i

ip-mask

IP network mask format: m.m.m.m

ip-prefix

IP prefix format: x.x.x.x/ml

area

Configure area properties

area-id-ip

OSPF area ID in IP address format

area-id-int

OSPF area ID as a decimal format

Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

next-hop-self

[ no | default ] next-hop-self

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

next-hop-self

Set our peering address as nexthop
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af

next-hop-self (router-bgp-neighbor-af-ipv4-mdt)

[ no | default ] next-hop-self

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

next-hop-self

Set our peering address as nexthop

Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

next-hop-third-party

[ no | default ] next-hop-third-party

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

next-hop-third-party

Compute a third-party nexthop if possible
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt

next-hop

[no] { next-hop [ backup <interface> ] <next-hop> out-label { <static-outlabel> | explicit-null | implicit-null } | next-hop auto-resolve out-label { <static-outlabel> | explicit-null | implicit-null } }

Syntax Description

no

(Optional) Negate a command or set its defaults

next-hop

Nexthop

next-hop

Destination IPv4 next hop

static-outlabel

Label Value

interface

(Optional) Back up interface

out-label

Output label

explicit-null

IETF MPLS IPv4 explicit null label (0)

implicit-null

IETF MPLS implicit null label (3)

auto-resolve

auto resolve the destination path

backup

(Optional) Backup destination
Command Mode
  • /exec/configure/mpls_static/ipv4/input

next-hop out-label

[no] { next-hop [ backup <interface> ] <ipv6-next-hop> out-label { <static-outlabel> | explicit-null | implicit-null } | next-hop auto-resolve out-label { <static-outlabel> | explicit-null | implicit-null } }

Syntax Description

no

(Optional) Negate a command or set its defaults

next-hop

Nexthop

static-outlabel

Label Value

interface

(Optional) Back up interface

out-label

Output label

explicit-null

IETF MPLS IPv6 explicit null label (2)

implicit-null

IETF MPLS implicit null label (3)

auto-resolve

auto resolve the destination path

backup

(Optional) Backup destination

Command Mode
  • /exec/configure/mpls_static/ipv6/input

nexthop route-map

[no] nexthop route-map <rmap-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

nexthop

Nexthop tracking

route-map

Route map for valid nexthops

rmap-name

Route-map name

Command Mode
  • /exec/configure/router-bgp/router-bgp-af
  • /exec/configure/router-bgp/router-bgp-af-ipv4-mdt
  • /exec/configure/router-bgp/router-bgp-af-l2vpn-vpls
  • /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn
  • /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn
  • /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

nexthop trigger-delay critical

{ nexthop trigger-delay critical <criticaldelay> non-critical <noncriticaldelay> } | { no nexthop trigger-delay }

Syntax Description

no

Negate a command or set its defaults

nexthop

Nexthop tracking

trigger-delay

Set the delay to trigger nexthop tracking

critical

Nexthop changes affecting reachability

non-critical

Other nexthop changes

noncriticaldelay

Delay value (miliseconds)

criticaldelay

Delay value (miliseconds)
Command Mode
  • /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

no-more

no-more

Syntax Description

|

Pipe command output to filter

no-more

Turn-off pagination for command output
Command Mode
  • /output

no

{ [ no | default ] } address-family ipv4 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv4

Configure IPv4 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

no (router-bgp-prefixneighbor)

{ [ no | default ] } address-family ipv6 { unicast | multicast }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family for peer

ipv6

Configure IPv6 address-family

unicast

Configure Unicast sub-address-family

multicast

Configure Multicast sub-address-family

Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

no (router-bgp-prefixneighbor)

{ [ no | default ] } address-family ipv4 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

ipv4

Configure IPv4 address-family

mvpn

Configure Multicast VPN

Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

no address-family ipv6 mvpn

{ [ no | default ] } address-family ipv6 mvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

address-family

Configure an address-family

ipv6

Configure IPv6 address-family

mvpn

Configure Multicast VPN

Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor

no ip address

[no] ip address [ { <ip-addr> <ip-mask> | <ip-prefix> } [ route-preference <pref> ] [ tag <tag> ] ] | ip address { <ip-addr> <ip-mask> | <ip-prefix> } [ route-preference <pref> ] [ tag <tag> ]

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

address

Configure IP address on interface

ip-addr

(Optional) IP address in format i.i.i.i

ip-mask

(Optional) IP network mask in format m.m.m.m

ip-prefix

(Optional) IP prefix and network mask length in format x.x.x.x/m

route-preference

(Optional) URIB route preference for local/direct routes

pref

(Optional) Local/direct route preference

tag

(Optional) URIB route tag value for local/direct routes

tag

(Optional) Local/direct tag value
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-mpls-tunnel /exec/configure/if-gre-tunnel /exec/configure/if-vsan /exec/configure/if-cpp

no ip address

[no] ip address { <ip-addr> <ip-mask> | <ip-prefix> } secondary | ip address { <ip-addr> <ip-mask> | <ip-prefix> } secondary

Syntax Description

no

Negate a command or set its defaults

ip

Configure IP features

address

Configure IP address on interface

ip-addr

IP address in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip-prefix

IP prefix and network mask length in format x.x.x.x/m

secondary

Configure additional IP addresses on interface
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config /exec/configure/if-gre-tunnel /exec/configure/if-6to4-tunnel /exec/configure/if-vsan /exec/configure/if-cpp

no ipv6 address use-link-local-only

[no] ipv6 address use-link-local-only | ipv6 address use-link-local-only

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

address

Configure IPv6 address on interface

use-link-local-only

Enable IPv6 on interface using only a single link-local address
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-gre-tunnel /exec/configure/if-6to4-tunnel /exec/configure/if-vsan

no ipv6 link-local

[no] ipv6 link-local [ <ipv6-addr> ] | ipv6 link-local <ipv6-addr>

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

link-local

Change format of link-local address
Command Mode
  • /exec/configure/if-vlan /exec/configure/if-mgmt-config /exec/configure/if-gre-tunnel /exec/configure/if-6to4-tunnel /exec/configure/if-igp /exec/configure/if-vsan

no ipv6 neighbor

[no] ipv6 neighbor <ipv6-addr> [ <mac-addr> ] | ipv6 neighbor <ipv6-addr> <mac-addr>

Syntax Description

no

Negate a command or set its defaults

ipv6

Configure IPv6 features

neighbor

Configure IPv6 address to layer-2 address mapping

mac-addr

(Optional) Layer-2 MAC address
Command Mode
  • /exec/configure/if-igp /exec/configure/if-mgmt-config /exec/configure/if-vlan-common

no snmp-server enable traps ospf

{ { no snmp-server enable traps ospf [ <tag> ] rate-limit [ <window> <rate> ] } | { snmp-server enable traps ospf [ <tag> ] rate-limit <window> <rate> } }

Syntax Description

no

Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

ospf

Enable SNMP OSPF traps

tag

(Optional) Process tag

rate-limit

Trap rate limit values

window

(Optional) Rate limit window size in seconds

rate

(Optional) Max number of traps sent in window time

tag

(Optional)

Command Mode
  • /exec/configure

no snmp-server enable traps ospfv3 rate-limit

{ { no snmp-server enable traps ospfv3 [ <tag> ] rate-limit } | { snmp-server enable traps ospfv3 [ <tag> ] rate-limit <swindow> <rate> } }

Syntax Description

no

Negate a command or set its defaults

snmp-server

Configure snmp server

enable

Enable SNMP Traps

traps

Enable SNMP traps

ospfv3

Enable SNMP OSPFv3 traps

tag

(Optional) Process tag

rate-limit

Trap rate limit values

swindow

Rate limit window size in seconds

rate

Max number of traps sent in window time

tag

(Optional)

Command Mode
  • /exec/configure

no system default switchport

{ no system default switchport }

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

default

Configure system default values

switchport

Configure switchport
Command Mode
  • /exec/configure

no system default switchport shutdown

{ no system default switchport shutdown }

Syntax Description

no

Negate a command or set its defaults

system

System configuration commands

default

Configure system default values

switchport

Configure switchport

shutdown

Configure admin state
Command Mode
  • /exec/configure

node

[no] node [ ip <ip-addr> | IPv6 <ip-addrv6> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

node

ITD node

ip

(Optional) ITD node IPv4 address

ip-addr

(Optional) ITD node IP4 prefix in format i.i.i.i

IPv6

(Optional) ITD node IPv6 address
Command Mode
  • /exec/configure/itd-device-group

nsf await-redist-proto-convergence

{ [ no ] nsf await-redist-proto-convergence }

Syntax Description

no

(Optional) Negate a command or set its defaults

nsf

Non-stop forwarding

await-redist-proto-convergence

Specify whether EIGRP should wait for other protocols to converge before advertising routes
Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

ntp access-group

[no] ntp access-group { peer | serve-only | serve | query-only } <acl-name>

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

access-group

NTP access-group

peer

access-group peer

serve

access-group serve

serve-only

access-group serve-only

query-only

access-group query-only

acl-name

Name of access list
Command Mode
  • /exec/configure

ntp authenticate

[no] ntp authenticate

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

authenticate

Enable/Disable authentication
Command Mode
  • /exec/configure

ntp authentication-key

[no] ntp authentication-key <number> md5 <md5> [ 0 | 7 ]

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

authentication-key

NTP authentication key

number

authentication key number (range 1-65535)

md5

use md5 authentication scheme

md5

MD5 string

0

(Optional) clear text

7

(Optional) encrypted
Command Mode
  • /exec/configure

ntp drop-aged-packet

[no] ntp drop-aged-packet

Syntax Description

no

(Optional) Negate a command or set its defaults

ntp

NTP Configuration

drop-aged-packet

Enable or disable Riviera Timestamp Check.
Command Mode
  • /exec/configure

ntp logging

[no] ntp logging

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

logging

Enable/Disable logging of NTPD Events
Command Mode
  • /exec/configure

ntp master

[no] ntp master [ <stratum-no> ]

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

master

Act as NTP master clock

stratum-no

(Optional) Stratum number
Command Mode
  • /exec/configure

ntp peer

[no] ntp peer <host0> [ prefer | key <keyid> | use-vrf { <vrf-name> | <vrf-known-name> } | minpoll <minpoll> | maxpoll <maxpoll> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

ntp

NTP Configuration

peer

NTP Peer address

host0

Hostname/IP address of the NTP Peer

prefer

(Optional) Preferred Server

key

(Optional) Keyid to be used while communicating to this server

keyid

(Optional) Value of keyid 1-65535

use-vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

minpoll

(Optional) Minimum interval to poll a peer

minpoll

(Optional) Poll interval in secs to a power of 2 [default 4]

maxpoll

(Optional) Maximum interval to poll a peer

maxpoll

(Optional) Poll interval in secs to a power of 2 [default 6]
Command Mode
  • /exec/configure

ntp rts-update

[no] ntp rts-update

Syntax Description

no

(Optional) Negate a command or set its defaults

ntp

NTP Configuration

rts-update

Enable or disable RTS update to linecards.
Command Mode
  • /exec/configure

ntp server

[no] ntp server <host0> [ prefer | key <keyid> | use-vrf { <vrf-name> | <vrf-known-name> } | minpoll <minpoll> | maxpoll <maxpoll> ] +

Syntax Description

no

(Optional) Negate a command or set its defaults

ntp

NTP Configuration

server

NTP server address

host0

Hostname/IP address of the NTP Server

prefer

(Optional) Preferred Server

key

(Optional) Keyid to be used while communicating to this server

keyid

(Optional) Value of keyid 1-65535

use-vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

minpoll

(Optional) Minimum interval to poll a server

minpoll

(Optional) Poll interval in secs to a power of 2 [default 4]

maxpoll

(Optional) Maximum interval to poll a server

maxpoll

(Optional) Poll interval in secs to a power of 2 [default 6]
Command Mode
  • /exec/configure

ntp source-interface

[no] ntp source-interface <if_index>

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

source-interface

Source interface sending NTP packets

if_index

Source interface
Command Mode
  • /exec/configure

ntp source

[no] ntp source <ip-addr>

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP Configuration

source

Source of NTP packets

ip-addr

IPv4/IPv6 address
Command Mode
  • /exec/configure

ntp sync-retry

ntp sync-retry

Syntax Description

ntp

NTP configuration

sync-retry

Retry synchronization with configured servers
Command Mode
  • /exec

ntp trusted-key

[no] ntp trusted-key <number>

Syntax Description

no

(Optional) Negate a command or set its default

ntp

NTP configuration

trusted-key

NTP trusted-key

number

trusted-key number
Command Mode
  • /exec/configure

nv overlay evpn

[no] nv overlay evpn

Syntax Description

no

(Optional) Negate a command or set its defaults

nv

Command to enable/disable features

overlay

Command to enable/disable features

evpn

Enable/Disable Ethernet VPN (EVPN)
Command Mode
  • /exec/configure

nve interface

nve interface <nve-if> replication-server <rep-addr> { up | down }

Syntax Description

nve

Configure NVE information

interface

Interface

nve-if

NVE interface

replication-server

Configure a replication server

rep-addr

Replication Server IP Address

up

mark replication-server up

down

mark replication-server down
Command Mode
  • /exec

nve interface

nve interface <nve-if> remap-replication-servers

Syntax Description

nve

Configure NVE information

interface

Interface

nve-if

NVE interface

remap-replication-servers

Remap Replication servers to VNIs
Command Mode
  • /exec

nxapi

{ nxapi { http | https } port <s0> } | { no nxapi { http | https } } | { no nxapi { http | https } port <s0> }

Syntax Description

no

Negate a command or set its defaults

nxapi

Configure nxapi

s0

Port number. Please do not use well-known protocol ports

http

Http configuration

https

Https configuration

port

Port number
Command Mode
  • /exec/configure

nxapi certificate

{ nxapi certificate { { httpskey { keyfile <uri0> | <line> } } | { httpscrt { certfile <uri1> | <line1> } } | { enable } } }

Syntax Description

nxapi

Configure nxapi

certificate

Https certificate configuration

httpskey

Https private key

httpscrt

Https certificate

keyfile

Https key file

certfile

Https certificate file

enable

Enable the current certificate

uri0

File containing https private key for the user

line

nxapi https private key

uri1

File containing https certificate

line1

nxapi https certificate
Command Mode
  • /exec/configure

nxapi use-vrf

{ nxapi use-vrf { management | default | <vrf_name> } } | { no nxapi use-vrf { management | default | <vrf_name> } }

Syntax Description

no

Negate a command or set its defaults

nxapi

Configure nxapi

use-vrf

vrf to be used for nxapi communication

management

management vrf

default

default vrf

vrf_name

name of the vrf
Command Mode
  • /exec/configure