W Commands

watch

watch [ differences ] [ interval <time> ] <watch_cmd>

Syntax Description

watch

execute a program periodically

differences

(Optional) highlight the differences

interval

(Optional) watch interval

time

(Optional) interval in seconds

watch_cmd

enter the command you want to watch
Command Mode
  • /exec

wc

wc [ -c | -l | -w ]

Syntax Description

|

Pipe command output to filter

wc

Count words, lines, characters

-c

(Optional) Output character count

-l

(Optional) Output line count

-w

(Optional) Output word count
Command Mode
  • /output

weight (bgp)

{ weight <weight> } | { { no | default } weight [ <weight> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

weight

Set default weight for routes from this neighbor

weight

Default weight

Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6

weight

[no] weight <weight-value>

Syntax Description

no

(Optional) Negate a command or set its defaults

weight

weight for traffic distribution

weight-value

weight value
Command Mode
  • /exec/configure/itd-dg-node

weighting

weighting { <weight-max-val> [ lower <low-thresh> [ upper <upper-thresh> ] | upper <upper-thresh> ] | track <track-obj> [ decrement <dec-val> ] } | no weighting [ { <weight-max-val> [ lower <low-thresh> [ upper <upper-thresh> ] | upper <upper-thresh> ] | track <track-obj> [ decrement <dec-val> ] } ]

Syntax Description

no

Negate a command or set its defaults

weighting

Gateway weighting and tracking

weight-max-val

Weighting maximum value

lower

(Optional) Weighting lower threshold

low-thresh

(Optional) Weighting lower threshold value

upper

(Optional) Weighting upper threshold

upper-thresh

(Optional) Weighting upper threshold value

track

Interface tracking

track-obj

Tracked object

decrement

(Optional) Weighting decrement

dec-val

(Optional) Decrement value 1 255
Command Mode
  • /exec/configure/if-eth-any/glbp

where

where

Syntax Description

where

shows the cli context you are in
Command Mode
  • /global

where detail

where detail

Syntax Description

where

shows the cli context you are in

detail

shows each entry on separate line
Command Mode
  • /global

which

which

Syntax Description

which

shows which cli commands are available in current mode (see also 'show cli syntax' which has more options)
Command Mode
  • /global

wide-metric-only

[no] wide-metric-only

Syntax Description

no

(Optional) Negate a command or set its defaults

wide-metric-only

Advertise only wide metric
Command Mode
  • /exec/configure/router-isis/router-isis-vrf-common

wred-queue qos-group-map queue-only

[no] wred-queue qos-group-map queue-only { <qid> }

Syntax Description

no

(Optional) Negate the command

wred-queue

Enable queue based ECN marking for specific qos-group

queue-only

Enable queue based ECN marking

qos-group-map

Qid value

qid

Provide qos-group value
Command Mode
  • /exec/configure

write erase

write erase

Syntax Description

write

Write current configuration

erase

Destroys the configuration on persistent media

Command Mode

  • /exec

Usage Guidelines

You can erase the configuration on your device to return to the configuration defaults. In this context, configuration refers to the startup configuration as displayed by the show startup command. No other internal application or process states are cleared.

write erase boot

write erase boot

Syntax Description

write

Write current configuration

erase

Destroys the configuration on persistent media

boot

Destroys boot configuration on persistent media
Command Mode
  • /exec

wrr unicast-bandwidth

[no] wrr unicast-bandwidth <bw>

Syntax Description

no

(Optional) Negate the command

wrr

Configure Unicast Traffic Bandwidth Percentage

unicast-bandwidth

Specify rate as percentage of interface data-rate

bw

Value in percentage (Default is set to 50)
Command Mode
  • /exec/configure