Introduction to Smart Switches
Smart Switches
Smart Switches are the switches that provide:
- embedded security with Hypershield
- advanced segmentation and connectivity, and
- hardware-accelerated architecture.
Smart Switch capabilities
Embedded security with Hypershield–Smart Switches provide service-accelerated performance and simplify the security architecture by integrating directly into the network, eliminating the need for separate Layer 4 stateful firewalls.
Advanced segmentation and connectivity–These switches facilitate secure segmentation and communication between security zones across the data center, interconnects, and cloud environments.
Hardware-accelerated architecture–Smart Switches integrate Data Processing Units (DPUs) with networking ASICs to enhance both data center networking throughput and security processing capabilities.
N9300 Series Smart Switches
The N9300 Series Smart Switches are integrated network devices designed for
- scalable
- secure, and
- efficient data center operations.
They combine advanced networking and security features with hardware acceleration and software flexibility, embedding stateful security powered by Hypershield directly into the network fabric.
N9300 Series Smart Switches architecture and deployment
The N9300 Series Smart Switches utilize Silicon One® E100 ASICs for high-performance switching and DPUs for enhanced security and services. The family includes 100G and 25G switches with 800G DPU acceleration.
Models such as the N9348Y2C6D-SE1U and N9324C-SE1U offer flexibility and performance, making them ideal Top-of-Rack (ToR) solutions for VXLAN-EVPN, BGP fabrics, and multisite deployments.
These switches can be deployed as leaf switches, border leaf switches, or border gateways, enabling adaptable and high-performing data center architectures.
Smart Switches integrate Hypershield technology to enforce security policies at line rate, embedding DPU security functions into the network infrastructure without requiring additional hardware.
For details about Hypershield and Hypershield integration, refer to Cisco Hypershield Release Notes, Cisco Hypershield User Documentation. and Cisco Hypershield Reference Documentation. For details about support for Hypershield on-premise controller and Cloud Control, also refer to Cisco Cloud Control documentation.
Smart Switch operating modes
The N9300 Series Smart Switches offer converged switching and routing services. The N9300 Series Smart Switches operate in network mode (NPU functions) and DPU security mode (DPU functions). Both the network and DPU security features are available in the DPU security mode.
For visibility into forwarding path tracing between NPU and DPU, use the packet tracer for DPU interfaces.
The DPU security mode refers to the capability of the switch to provide distributed, stateful Layer-4 segmentation and DPU security enforcement directly within the switch using embedded Data Processing Units (DPUs).
N9324C-SE1U switch
Beginning with NX-OS Release 10.6(2)F, the N9300 Series Smart Switches introduce the N9324C-SE1U switch, a 1-RU solution designed to deliver high-performance networking capabilities. Its features include:
- 24 x 100G ports
- Silicon One E100 ASIC offering high-speed connectivity and scalability
- 4 DPU offering software-defined stateful services
N9324C-SE1U hardware details
For hardware details, refer to the Cisco N9324C-SE1U NX-OS-Mode Switch Hardware Installation Guide.
N9348Y2C6D-SE1U switch
Beginning with NX-OS Release 10.6(2)F, the N9300 Series Smart Switches introduce the N9348Y2C6D-SE1U switch, a 1-RU solution designed to deliver high-performance. It features include:
- 48-port 25G + 2-port 100G + 6-port 400G switch
- Silicon One E100 ASIC offering high-speed connectivity and scalability
- 2 DPUs offering software-defined stateful services
N9348Y2C6D-SE1U hardware details
For hardware details, refer to the Cisco N9348Y2C6D-SE1U NX-OS-Mode Switch Hardware Installation Guide.
Smart Switch feature support through NX-OS releases
The N9348Y2C6D-SE1U and N9324C-SE1U Smart Switches support only network mode in NX-OS Release 10.6(2)F and 10.6(3)F. Beginning with 10.6(3s)F, DPU Security mode is is also supported.
Upgrade, licensing, and verified scalability
|
Feature |
Release |
Document |
|---|---|---|
|
Software image for Smart Switches |
10.6(2)F |
|
|
Power-On Auto Provisioning |
10.6(2)F |
|
|
Graceful Insertion and Removal (GIR) |
10.6(2)F |
|
|
Smart Licensing Using Policy support |
10.6(2)F |
|
|
Network Mode Scale updates |
10.6(x) |
Network mode feature support
These tables contain the list of software features that are supported as part of the network mode and the guides in which these features are documented.
Interfaces
|
Feature |
Release |
Document |
|---|---|---|
|
Port profiles |
10.6(2)F |
|
|
Layer 2 access and trunk ports |
10.6(2)F |
|
|
Native VLAN traffic and tagging |
10.6(2)F |
|
|
Reserved VLAN |
10.6(2)F |
|
|
Switch Virtual Interface (SVI) and VLAN logical interfaces |
10.6(2)F |
|
|
Layer 3 routed interfaces and subinterfaces |
10.6(2)F |
|
|
Single-Hop BFD |
10.6(2)F |
|
|
LACP and port channels |
10.6(2)F |
|
|
Virtual Port Channel (vPC) |
10.6(2)F |
|
|
Q-in-Q VLAN tunnels |
10.6(2)F |
|
|
Unidirectional Link Detection (UDLD) |
10.6(2)F |
Security
|
Feature |
Release |
Document |
|---|---|---|
|
AAA |
10.6(2)F |
|
|
RADIUS |
10.6(2)F |
|
|
TACACS+ |
10.6(2)F |
|
|
SSH |
10.6(2)F |
|
|
PACL |
10.6(2)F |
|
|
RACL |
10.6(2)F |
|
|
PBR ACL |
10.6(2)F |
|
|
DHCP relay |
10.6(2)F |
|
|
Custom CoPP |
10.6(2)F |
|
|
MACsec |
10.6(2)F |
|
|
Secure Key Integration Protocol (SKIP) |
10.6(2)F |
|
|
Traffic storm control |
10.6(2)F |
|
|
Live Protect |
10.6(2)F |
|
|
Live Protect enhancements |
10.6(3)F |
Routing and Switching
|
Feature |
Release |
Document |
|---|---|---|
|
VLANs |
10.6(2)F |
|
|
Global MAC learning |
10.6(2)F |
|
|
STP |
10.6(2)F |
|
|
Rapid PVST+ |
10.6(2)F |
|
|
MST |
10.6(2)F |
|
Feature |
Release |
Document |
|---|---|---|
|
IPv4 Layer 3 unicast features |
10.6(2)F |
|
|
IPv6 Layer 3 unicast features |
10.6(2)F |
|
|
Static routing |
10.6(2)F |
|
|
VRF |
10.6(2)F |
|
|
BGP |
10.6(2)F |
|
|
OSPF |
10.6(2)F |
|
|
EIGRP |
10.6(2)F |
|
|
RIP |
10.6(2)F |
|
|
IS-IS |
10.6(2)F |
|
|
ECMP |
10.6(2)F |
|
|
Policy-Based Routing (PBR) |
10.6(2)F |
|
|
uRPF and Layer 3 path validation |
10.6(2)F |
|
|
HSRP, VRRP, vPC, and vPC peer gateway |
10.6(2)F |
|
Feature |
Release |
Document |
|---|---|---|
|
IPv4 multicast routing and multicast features |
10.6(2)F |
|
|
IGMP snooping |
10.6(2)F |
|
|
Multicast route-aliveness, hitbit and route statistics, NLB, IPv4 Layer 2 and Layer 3 multicast, and multicast consistency checker |
10.6(2)F |
|
|
IPv6 multicast routing and MLD snooping |
10.6(3)F |
|
|
IPv4 multicast flow counters |
10.6(2)F |
|
Feature |
Release |
Document |
|---|---|---|
|
VXLAN BGP EVPN |
10.6(2)F |
|
|
VXLAN BGP EVPN Multi-Site Anycast BGW and vPC BGW |
10.6(2)F |
|
|
Multicast fast convergence for vPC BGW failures |
10.6(2)F |
|
|
VXLAN to SR-MPLS handoff |
10.6(2)F |
|
|
IPv4 unicast and multicast underlay with ingress replication or PIM ASM |
10.6(2)F |
|
|
Multicast underlay BUD node |
10.6(2)F |
|
|
ARP suppression |
10.6(2)F |
|
|
ND suppression |
10.6(3)F |
|
|
TRMv4 Layer 3 mode |
10.6(2)F |
|
|
DHCP relay in VXLAN BGP EVPN |
10.6(2)F |
|
|
DSVNI |
10.6(2)F |
|
|
BGW advertisement |
10.6(2)F |
|
|
VXLAN counters |
10.6(2)F |
|
|
VXLAN NGOAM |
10.6(2)F |
|
|
EVPN ECMP for VNF and PVNF |
10.6(2)F |
|
Feature |
Release |
Document |
|---|---|---|
|
Segment Routing Layer 3 VPN with SR-MPLS underlay |
10.6(2)F |
|
|
MPLS encapsulation statistics |
10.6(3)F |
Quality of Service
|
Feature |
Release |
Document |
|---|---|---|
|
QoS classification |
10.6(2)F |
|
|
Queuing and scheduling |
10.6(2)F |
|
|
QoS statistics |
10.6(2)F |
|
|
Interface QoS support for QoS classification policies |
10.6(3)F |
System management
|
Feature |
Release |
Document |
|---|---|---|
|
Generic Online Diagnostics (GOLD) |
10.6(2)F |
|
|
Link Layer Discovery Protocol (LLDP) |
10.6(2)F |
|
|
SNMPv1, SNMPv2c, and SNMPv3 |
10.6(2)F |
|
|
Sampled Flow (sFlow) |
10.6(2)F |
|
|
Ingress NetFlow |
10.6(2)F |
|
|
Switched Port Analyzer (SPAN) |
10.6(2)F |
|
|
Encapsulated Remote SPAN (ERSPAN) |
10.6(2)F |
|
|
Precision Time Protocol (PTP) |
10.6(3)F |
Telemetry and programmability
|
Feature |
Release |
Document |
|---|---|---|
|
Original and OpenConfig YANG |
10.6(2)F |
|
|
NETCONF agent |
10.6(2)F |
|
|
RESTCONF agent |
10.6(2)F |
|
|
gNMI management interface |
10.6(2)F |
|
|
gNMI set-replace and commit-confirmed workflow |
10.6(2)F |
|
|
Syslog subscription through gNMI for OpenConfig |
10.6(2)F |
|
|
gRPC agent |
10.6(2)F |
|
|
XML management interface |
10.6(2)F |
|
|
gNOI operation interface |
10.6(2)F |
|
|
Diagnosis and serviceability |
10.6(2)F |
|
|
Telemetry |
10.6(2)F |
|
|
DME data collection |
10.6(2)F |
|
|
NX-API data sources |
10.6(2)F |
|
|
GPB encoding over gRPC transport |
10.6(2)F |
|
|
JSON encoding over HTTP |
10.6(2)F |
|
|
Open NX-OS automation |
10.6(2)F |
|
|
NX-API CLI and REST |
10.6(2)F |
|
|
Python API |
10.6(2)F |
|
|
Tcl scripting |
10.6(2)F |
|
|
Ansible integration |
10.6(2)F |
|
|
Third-party agent integration |
10.6(2)F |
DPU security mode feature support
This table contains the list of software features that are supported as part of the DPU security mode and the guides in which these features are documented.
Feature | Release | Document |
|---|---|---|
Enhanced software image for DPU | 10.6(3s)F | |
DPU security mode enablement | 10.6(3s)F | Configurations for DPU Security Mode and Troubleshooting Smart Switches in DPU Security mode |
Network security operations admin role | 10.6(3s)F | Configurations for DPU Security Mode |
VRF redirection and VLAN redirection | 10.6(3s)F |
Configurations for DPU Security Mode and Troubleshooting Smart Switches in DPU Security mode |
Traffic inspection and integration with VXLAN | 10.6(3s)F |
Configurations for DPU Security Mode and Troubleshooting Smart Switches in DPU Security mode |
Inter-VRF Traffic Inspection | 10.6(3s)F |
Configurations for DPU Security Mode and Troubleshooting Smart Switches in DPU Security mode |
High Availability | 10.6(3s)F |
Configurations for DPU Security Mode and Troubleshooting Smart Switches in DPU Security mode |
Layer 2 isolation for micro segmentation | 10.6(3s)F | Configurations for DPU Security Mode |
DPU Security Mode Scale updates | 10.6(x) |