Appliance Specifications

This chapter lists the physical, environmental, and power specifications for the appliance.

Physical specifications

This table lists the physical specifications for the appliance.

Table 1. Physical specifications
Description	Specification
Height	1.7 in. (43.2 mm)
Width	16.9 in. (429.0 mm)
Depth (length)	Server only: 30 in. (762 mm) Server with slide rail: 31.5 in. (800.1 mm)
Weight	Maximum: 42.43 lb (19.30 kg) Minimum: 22.32 lb (10.13 kg)

This table lists the environmental requirements and specifications for the appliance.

Table 2. Environmental specifications
Description	Specification
Temperature, operating	10°C to 35°C (50°F to 95°F) with no direct sunlight. Derate the maximum temperature by 1°C per every 984.2 feet (300 meters) of altitude above sea level.
Temperature, non-operating (when the server is stored or transported)	Below -40°C or above 65°C (below -40°F or above 149°F) Maximum rate of change (operating and non-operating) 20°C/hr (36°F/hr)
Humidity (RH), operating	8 to 90% and 24°C (75°F) maximum dew-point temperature, non-condensing environment
Humidity (RH), non-operating (when the server is stored or transported)	Below 5% or above 95% and 33°C (91°F) maximum dew-point temperature, non-condensing environment
Altitude, operating	0 to 10,000 feet (3048 meters)
Altitude, non-operating (when the server is stored or transported)	0 to 40,000 feet (12192 meters)
Sound power level Measure A-weighted per ISO7779 LwAd (Bels) Operation at 73°F (23°C)	5.8
Sound pressure level Measure A-weighted per ISO7779 LpAm (dBA) Operation at 73°F (23°C)	43

Note

Do not mix power supply types or wattages in the server. Both power supplies must be identical.

This section lists the specifications for 1200 W AC power supply.

Table 3. 1200 W AC power supply specifications
Description	Specification
AC input voltage	100 to 230 VAC
AC input frequency	50 to 60 Hz
Maximum AC input current	12.97 A at 100 VAC
Maximum input volt-amperes	1345 VA at 208 VAC
Maximum inrush current	20 A
Maximum hold-up time	12 ms at 1200 W
Maximum output power per PSU	1100 W at 100 – 120 VAC 1200 W at 208 – 230 VAC
Power supply output voltage	12 VDC
Power supply standby voltage	12 VDC
Efficiency rating	Climate Savers Platinum Efficiency (80Plus Titanium certified)
Form factor	RSP2
Input connector	IEC320 C14

Each power supply in the appliance has a power cord.

Note

Only these approved power cords or jumper power cords are supported.

Table 4. Supported power cords
Description	Length (feet)	Length (meters)
CAB-48DC-40A-8AWG DC power cord, -48 VDC, 40 A, 8 AWG Three-socket mini-fit connector to three-wire	11.7	3.5
CAB-C13-C14-AC AC power cord, 10 A; C13 to C14, recessed receptacle	9.8	3.0
CAB-250V-10A-AR AC power cord, 250 V, 10 A Argentina	8.2	2.5
CAB-C13-C14-2M-JP AC power cord, C13 to C14 Japan PSE mark	6.6	2.0
CAB-9K10A-EU AC power cord, 250 V, 10 A; CEE 7/7 plug Europe	8.2	2.5
CAB-250V-10A-IS AC power cord, 250 V, 10 A Israel	8.2	2.5
CAB-250V-10A-CN AC power cord, 250 V, 10 A PR China	8.2	2.5
CAB-ACTW AC power cord, 250 V, 10 A Taiwan	7.5	2.3
CAB-C13-CBN AC cabinet jumper power cord, 250, 10 A C13 to C14	2.2	0.68
CAB-C13-C14-2M AC cabinet jumper power cord, 250 V, 10 A C13 to C14	6.6	2.0
CAB-9K10A-AU AC power cord, 250 V, 10 A, 3112 plug Australia	8.2	2.5
CAB-N5K6A-NA AC power cord, 200/240 V, 6 A North America	8.2	2.5
CAB-250V-10A-ID AC power cord, 250 V, 10 A India	8.2	2.5
CAB-9K10A-SW AC power cord, 250 V, 10 A, MP232 plug Switzerland	8.2	2.5
CAB-250V-10A-BR AC power cord, 250 V, 10 A Brazil	8.2	2.5
CAB-9K10A-UK AC power cord, 250 V, 10 A (13 A fuse), BS1363 plug United Kingdom	8.2	2.5
CAB-9K12A-NA AC power cord, 125 V, 13 A, NEMA 5-15 plug North America	8.2	2.5
CAB-AC-L620-C13 AC power cord, NEMA L6-20 to C13 connectors	6.6	2.0
CAB-9K10A-IT AC power cord, 250 V, 10 A, CEI 23-16/VII plug Italy	8.2	2.5
R2XX-DMYMPWRCORD No power cord; PID option for ordering appliance with no power cord	NA	NA