Cisco Network Function Virtualization Infrastructure Software Configuration Guide, Release 26.2 and Later

PDF

Cisco Network Function Virtualization Infrastructure Software Configuration Guide, Release 26.2 and Later

Supported hardware platforms

Updated: June 29, 2026

Want to summarize with AI?

Log in

Lists the Cisco UCS Rack Servers supported by Cisco NFVIS, including server models, minimum supported releases, and supported PIDs.

This reference provides information about the hardware platforms supported by Cisco NFVIS, specifically focusing on Cisco UCS Rack Servers across different generations.

Table 1. Supported PIDs

Server Model

Minimum Supported Release

Supported PIDs

Cisco UCS C M6 Rack Server

Cisco NFVIS Release 4.18.2a

  • BE6K-M6-XU

  • BE6K-M6-K9

  • BE7M-M6-K9

  • BE7M-M6-XU

  • BE7H-M6-K9

  • BE7H-M6-XU

Cisco UCS C M5 Rack Server

Cisco NFVIS Release 4.18.2a

  • BE6M-M5-K9

  • BE6M-M5-XU

  • BE6H-M5-K9

  • BE6H-M5-XU

  • BE7M-M5-K9

  • BE7M-M5-XU

  • BE7H-M5-K9

  • BE7H-M5-XU

Cisco UCS C M7 Rack Server

Cisco NFVIS Release 4.18.2a

  • BE6K-M7-K9

  • BE6K-M7-XU

  • BE7M-M7-K9

  • BE7M-M7-XU

  • BE7H-M7-K9

  • BE7H-M7-XU

  • CE1400V-M7-K9

Cisco UCS C M8

Cisco NFVIS Release 26.2.1

  • BE6K-M8-K9

  • BE6K-M8-XU

  • BE7M-M8-K9

  • BE7M-M8-XU

  • BE7H-M8-K9

  • BE7H-M8-XU
Note

For UCS C-Series M5 and M6 servers, if the rack servers have LOM (LAN on Motherboard) ports, the WAN bridge will be created on port GE0-0, which is a LOM port, and GE0-1 will be the LAN bridge on a LOM port. For UCS C-Series M7 Rack Servers, however, there are no LOM ports. Hence, the first slot in the chassis with a NIC inserted will have the WAN bridge and the LAN bridge.