- Feature History
- Using Cisco IOS XE Software
- Console Port Telnet and SSH Handling
- Configuring the Route Switch Processor
- Configuring Ethernet Interfaces
- Using the Management Ethernet Interface
- Configuring T1/E1 Interfaces
- Configuring Optical Interface Modules
- Configuring Serial Interfaces
- Enabling Support for Tunable DWDM-XFP-C
- Dying Gasp Support for Loss of Power Supply via SNMP, Syslog and Ethernet OAM
- Configuring Pseudowire
- Digital Optical Monitoring for Transceivers
- Configuring the SDM Template
- BCP Support on MLPPP
- Tracing and Trace Management
- Configuring and Monitoring Alarm
- OTN Wrapper Overview
- Using Zero Touch Provisioning
- Configuring 1G Traffic on 8-port 10 Gigabit Ethernet Interface Module
- Configuring 8/16-port 1 Gigabit Ethernet (SFP / SFP) + 1-port 10 Gigabit Ethernet (SFP+) / 2-port 1 Gigabit Ethernet (CSFP) Interface Module
Cisco ASR 900 Router Series Configuration Guide, Cisco IOS XE 16
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- August 1, 2019
Feedback