Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide, Cisco IOS XE Gibraltar 16.12.x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- July 8, 2019
Book Table of Contents
- Preface
- Read Me First
- Software Packaging and Architecture
- Using Cisco IOS XE Software
- Console Port, Telnet, and SSH Handling
- Consolidated Packages and SubPackages Management
- Software Upgrade Processes Supported by Cisco ASR 1000 Series Routers
- Software Upgrade Process Using install Commands
- High Availability Overview
- Broadband Scalability and Performance
- UniDirectional Link Detection (UDLD) Protocol
- Using the Management Ethernet Interface
- Network Synchronization Support
- IEEE 1588v2 PTP Support
- Configuring Bridge Domain Interfaces
- Enabling Support for Tunable DWDM-XFP-C
- Monitoring and Maintaining Multilink Frame Relay
- Configuring MPLS Layer 2 VPNs
- Enabling Management by REST API
- LSM-MLDP-based MVPN Support
- Tracing and Trace Management
- Packet Trace
- Configuring and Accessing the Web User Interface
- PPP Half-Bridge on the Cisco ASR 1000 Series Routers
- Cisco ASR 1000 Embedded Services Processor 10G Non Crypto Capable New Feature
- Ethernet Virtual Connections on Port Channels
- Configuring Traffic Storm Control
- Online Diagnostics
- Unsupported Commands
- Configuration Examples
Feedback