The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
See Data Models Configuration Guide for Cisco NCS 1001 and Telemetry Configuration Guide for Cisco NCS 1000 Series to refer the other configuration guides of NCS 1001.
This table summarizes new and changed information for configuration guide for Release 7.2.1, and lists where the features are documented.
Feature |
Description |
Where Documented |
---|---|---|
Back Reflection Parameter |
Back Reflection parameter is added to the output of show controllers ots command. This parameter reports the back reflection on the line TX port on the booster. |
|
Upgrade of EDFA and PSM OpenConfig Models |
The versions of EDFA and PSM OpenConfig models are upgraded. |
A complete list of supported open configuration models is available at https://github.com/openconfig/public/tree/master/release/models/optical-transport |
OpenConfig Telemetry |
The following sensor paths are supported in telemetry configuration on NCS 1001 node.
|