0/PM [0|1] Unit Unsupported
Default Severity: Critical (CR), Service Affecting (SA)
Logical Object: EQUIPMENT
The 0/PM [0|1] Unit Unsupported alarm is raised when a an usupported PSU is plugged within NCS1001 chassis. The alarms has two forms because of the two PSU:
- 0/PM0 unit unsupported
- 0/PM1 unit unsupported
Clear the 0/PM [0|1] Unit Unsupported Alarm
Procedure
Replace the PSU with correct part number and hardware revision. If the alarm does not clear, log into the Technical Support Website at http://www.cisco.com/c/en/us/support/index.html for more information or call Cisco TAC (1 800 553-2447). |