NTP-G341 Setting Up Secure Access to TL1
Purpose |
This procedure provisions the nodes for secure access to TL1. |
Tools/Equipment |
None |
Prerequisite Procedures |
NTP-G26 Set Up CTC Network Access |
Required/As Needed |
As needed |
Onsite/Remote |
Onsite or remote |
Security Level |
Superuser |
Procedure
Step 1 |
In the node view, click the pane. |
||
Step 2 |
Under the TL1 Access area, change the Access State to Secure. |
||
Step 3 |
Click Apply. Existing non-secure TL1 sessions, if any, are terminated. |
||
Step 4 |
To create a secure TL1 connection, enter the following command at the UNIX or Linux prompt: ssh -l username node-ip -p port-number The port number for secure TL1 is 4083. The port number for non-secure TL1 is3083.
|