System Product IDs

This appendix provides information about the PIDs for the Cisco NCS 6008 LCC and its components.

These tables list the components that make up the routing system, their PIDs (part numbers used to order the components), and descriptions.


Note
In the following tables, an equals sign (=) at the end of the PID indicates that the component can be ordered as a spare. For those components, be sure to include the equals sign as part of the PID.

Note
Although this appendix provides PIDs for routing system components, the Cisco online ordering and pricing tool has the most up-to-date information on the routing system and PIDs. You can access the ordering tool at the following URL (Cisco login required), and enter a search term such as “NCS” to view a list of components: https://apps.cisco.com/Commerce/home

Component Product IDs

Table 1. Cisco NCS 6008 LCC Component Product IDs

Component

Product ID

Description

8-slot line card chassis

NCS-6008

NCS-6008= (spare)

Cisco NCS 6008 Line Card Chassis

8-slot routing system

NCS-6008-SYS-S

Cisco NCS 6008 LCC system (includes two route processor cards, six fabric cards, two fan trays, and six power trays)

Route processor card

NC6-RP

NC6-RP= (spare)

Cisco NCS 6008 RP card

Fan tray

NC6-FANTRAY

NC6-FANTRAY= (spare)

Cisco NCS 6008 Fan Tray

NC6-FANTRAY-2

NC6-FANTRAY-2= (spare)

Cisco NCS 6008 Fan Tray 2

Power bus control module 1

NC6-PCM

NC6-PCM= (spare)

Cisco NCS 6008 PCM

AC power tray

NCS-AC-PWRTRAY

NCS-AC-PWRTRAY= (spare)

Cisco NCS AC PT

AC power module

PWR-3KW-AC-V2

PWR-3KW-AC-V2= (spare)

Cisco NCS AC PM

Power distribution unit bracket

NCS-PDU-BRKT

NCS-PDU-BRKT= (spare)

Cisco NCS PDU bracket

Delta power distribution unit

NCS-PDU-DELTA

NCS-PDU-DELTA= (spare)

Cisco NCS redundant 3-to-1 Phase Delta PDU

Wye power distribution unit

NCS-PDU-WYE

NCS-PDU-WYE= (spare)

Cisco NCS redundant 3-to-1 Phase Wye PDU

AC power cord 2

NC6-AC-CAB-NA

NC6-AC-CAB-AU

NC6-AC-CAB-UK

NC6-AC-CAB-EU

NC6-AC-CAB-IT

AC power cord—North America

AC power cord—Australia

AC power cord—United Kingdom

AC power cord—Europe

AC power cord—Italy

DC power tray

NCS-DC-PWRTRAY

NCS-DC-PWRTRAY= (spare)

Cisco NCS DC PT

DC power module

PWR-2KW-DC-V2

PWR-2KW-DC-V2= (spare)

Cisco NCS DC PM

100x10GE patch panel SR

NCS-PP-100X10-S

NCS-PP-100X10-SR= (spare)

Cisco NCS 100x10GE patch panel short reach

1 The PCM can be serviced in the field by Cisco personnel or with proper guidance from Cisco technical support.
2 The length of each power cord is 4.25 m.

Line Card Product IDs

Table 2. Cisco NCS 6008 LCC Product IDs

Component

Product ID

Description

10x100GE MS CPAK

NC6-10X100G-M-K

NC6-10X100G-M-K= (spare)

Cisco NCS 6000 Series 10x100GE multi-service CPAK

10x100GE LSR CPAK

NC6-10X100G-L-K

NC6-10X100G-L-K= (spare)

Cisco NCS 6000 Series 10x100GE LSR CPAK

10x100GE MS CXP

NC6-10X100G-M-P

NC6-10X100G-M-P= (spare)

Cisco NCS 6000 Series 10x100GE multi-service CXP

10x100GE LSR CXP

NC6-10X100G-L-P

NC6-10X100G-L-P= (spare)

Cisco NCS 6000 Series 10x100GE LSR CXP

60x10GE LC SFP+

NC6-60X10GE-L-S

NC6-60X10GE-L-S= (spare)

Cisco NCS 6000 Series 60x10GE lean-core SFP+

60x10GE MS SFP+

NC6-60X10GE-M-S

NC6-60X10GE-M-S= (spare)

Cisco NCS 6000 Series 60x10GE multi-service SFP+

20x100GE LSR QSPF28 and CPAK

NC6-20X100GE-L-C

NC6-20X100GE-L-C= (spare)

Cisco NCS 6000 Series 20x100Gbps LSR QSPF28 and CPAK

20x100GE MC QSPF28 and CPAK

NC6-20X100GE-M-C

NC6-20X100GE-M-C= (spare)

Cisco NCS 6000 Series 20x100Gbps multi-service QSPF28 and CPAK

Fabric Card Product IDs

Table 3. Fabric Card Product IDs

Component

Product ID

Description

S123 Fabric Card

NC6-FC

NC6-FC= (spare)

NCS 6008 S123 Fabric Card

Universal Fabric Card

NC6-FC2-U

NC6-FC2-U= (spare)

NCS 6008 Universal Fabric Card

MC S13 Fabric Card

NC6-FC-MC

NC6-FC-MC= (spare)

NCS 6008 S13 Multi-Chassis Fabric Card

Cosmetic Product IDs

Table 4. Cisco NCS 6008 LCC Cosmetic Product IDs

Component

Product ID

Description

Craft panel display

NCS-CRFT=

Cisco NCS craft panel display kit

Front left and right doors

NC6-DOOR-F=

Front left and right doors

Front top grille

NC6-GRILLE-FT=

Front top grille

Front bottom grille

NC6-GRILLE-FB=

Front bottom grille

Rear left and right doors

NC6-DOOR-R=

Rear left and right doors

Exhaust air deflector

NC6-GRILLE-R=

Exhaust air deflector, rear of the LCC

Accessory Product IDs

Table 5. Cisco NCS 6008 LCC Accessory Product IDs

Component

Product ID

Description

Drill hole template

NC6-DRILLTEMP=

Cisco NCS 6008 LCC drill hole template (spare)

Chassis filter

NC6-5XFILTER=

Cisco NCS 6008 LCC air filter, 5-pack (spare)

Vertical cable trough

NC6-TROUGH=

Cisco NCS 6008 vertical cable trough (spare)

Chassis lift dolly

NCS-LIFT

NCS-LIFT= (spare)

Cisco NCS chassis lift dolly

Lift upgrade

NCS-LIFT-BRKT=

Cisco CRS lift upgrade to Cisco NCS chassis (spare)

AC/DC PM slot cover

A9K-PEM-V2-FILR

AC/DC PM slot cover

Line card slot cover

NC6-LC-BLANK=

NC6-LC-BLANK2=

Cover for empty line card slot (spare)

Optical Module IDs

Table 6. Cisco NCS 6000 LCC Optical Module IDs

Component

Product ID

Description

Optical module set

NCS-FAB-OPT

Optical module set that includes 96 CXP-100G-SR12 modules for multi-chassis or back-to-back configurations.

NCS-FAB-OPT2

Optical module set that includes 96 ONS-CXP2-SR25 modules for multi-chassis or back-to-back configurations.

Note 

For Multi-Chassis systems: Two optical modules sets are required for each LCC: one set plugs into the S13 FCs on the LCC, and one set plugs into the S2 FC cards in the FCC.

For Back-to-Back systems: Two optical modules sets are required: one for each LCC.

CPAK

CPAK-100G-LR4

The Cisco CPAK 100GBASE-LR4 module supports link lengths of up to 10 km over standard G.652 single-mode fiber with SC connectors. It delivers an aggregate data signal of 100 Gbps, carried over four LAN wavelength-division multiplexing (WDM) wavelengths operating at a nominal 25 Gbps per lane. Optical multiplexing and demultiplexing of the four wavelengths are managed within the module. Nominal power consumption is less than 5.5W.

CPAK-100G-SR10

The Cisco CPAK 100GBASE-SR10 module delivers 100-Gbps links over 24-fiber ribbon cables terminated with MPO/MTP connectors. It can also be used in 10 x 10-Gb mode along with ribbon-to-duplex-fiber breakout cables for connectivity to ten 10GBASE-SR optical interfaces. It supports link lengths of 100m (150m) on laser-optimized OM3 (OM4) multifiber cables.

CPAK-100G-SR4

The Cisco 100GBASE-SR4 CPAK module supports link lengths of up to 70m (100m) over OM3 (OM4) Multimode Fiber with MPO connectors. It primarily enables high-bandwidth 100G optical links over 12-fiber parallel fiber terminated with MPO multifiber connectors. CPAK-100GE-SR4 supports 100GBase Ethernet rate.

CPAK-10X10G-LR

The Cisco CPAK 10x10G-LR module is used in 10 x 10-Gb mode along with ribbon-to-duplex SMF breakout cables for connectivity to ten 10GBASE-LR optical interfaces. It supports link lengths up to 10km over standard SMF, G.652. The module delivers 100-Gbps links over 24-fiber ribbon cables terminated with MPO/MTP connectors.

CPAK-10x10G-ERL

The Cisco CPAK 10x10G-ERL module is used in 10 x 10Gb mode along with ribbon-to-duplex SMF breakout cables for connectivity to ten 10GBASE-ER optical interfaces. It supports link lengths up to 25km over standard SMF, G.652. The module delivers 100-Gbps links over 24-fiber ribbon cables terminated with MPO/MTP connectors.

CPAK-100G-ER4L

The primary application of the Cisco CPAK 100GBASE-ER4 Lite module is to support 100-Gbps optical links over standard single-mode fiber (SMF, G.652) terminated with SC connectors. Nominal power consumption is less than 7.5W.

The ER4 Lite module is compatible with the 100GBASE-ER4 standard and supports link lengths up to about 25 km over standard SMF, G.652. It delivers an aggregate data signal of 100 Gbps, carried over four LAN wavelength-division multiplexing (WDM) wavelengths operating at a nominal 25 Gbps per lane. The module can be used over longer distances in engineered links with CPAK-100G-ER4L modules at both ends. Optical multiplexing and demultiplexing of the four wavelengths are managed within the module.

CPAK-100G-PSM4

The Cisco CPAK-100G-PSM4 module supports link lengths of up to 500 meters over SMF with MPO connectors. The 100 Gigabit Ethernet signal is carried over 12-fiber parallel fiber terminated with MPO multifiber connectors.

CXP

CXP-100G-SR10

The Cisco 100GBASE-SR10 CXP module supports link lengths up to 100m (<150m) over OM3 (OM4) multimode fiber (MMF) with MPO-24 connector.

SFP+

SFP-10G-SR

The Cisco 10GBASE-SR module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

SFP-10G-LR

The Cisco 10GBASE-LR module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).

SFP-10G-SR-X

The Cisco SFP-10G-SR-X module is a multirate 10GBASE-SR, 10GBASE-SW and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

SFP-10G-LR-X

The Cisco SFP-10G-LR-X module is a multirate 10GBASE-LR, 10GBASE-LW, and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652).

SFP-10G-ER

The Cisco 10GBASE-ER module supports a link length of up to 40 kilometers on standard single-mode fiber (SMF, G.652).

SFP-10G-ZR

The Cisco SFP-10G-ZR module is a multirate 10GBASE-ZR, 10GBASE-ZW, and OTU2/OTU2e module. It supports link lengths of up to about 80 kilometers on standard single-mode fiber (SMF, G.652). This interface is not specified as part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.

QSFP

QSFP-100G-SR4-S

The Cisco 100GBASE-SR4-S QSFP module supports link lengths of up to 70m (100m) over OM3 (OM4) Multimode Fiber with MPO connectors. It primarily enables high-bandwidth 100G optical links over 12-fiber parallel fiber terminated with MPO multifiber connectors. QSFP-100G-SR4-S supports 100GBase Ethernet rate.

QSFP-100G-LR4-S

The Cisco 100GBASE-LR4-S QSFP module supports link lengths of up to 10km over a standard pair of G.652 single-mode fiber with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. QSFP-100GE-LR4-S supports 100GBase Ethernet rate.

QSFP-100G-CWDM4-S

The Cisco QSFP-100G-CWDM4-S QSFP module supports link lengths of up to 2 km over a standard pair of G.652 single-mode fiber (SMF) with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.

QSFP-100G-PSM4-S

The Cisco QSFP-100G-PSM4-S QSFP module supports link lengths of up to 500 meters over SMF with MPO connectors. The 100 Gigabit Ethernet signal is carried over 12-fiber parallel fiber terminated with MPO multifiber connectors.

QSFP-100G-SM-SR

The Cisco QSFP-100G-SM-SR QSFP module supports link lengths of up to 2 kilometers over a standard pair of G.652 Single-Mode Fiber (SMF) with duplex LC connectors. The 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device. The operating temperature range is from +10 to +60°C with an optical link budget of 4.2 decibels. This 4.2-decibel link budget offers the ability to support the loss from patch panels in the link in a data center environment. QSFP‑100G‑SM-SR is interoperable with QSFP-100G-CWDM4-S.