Enhanced Test Command

First Published: August 9, 2001
Last Updated: October 19, 2009

The Enhanced Test Command feature allows a named user profile to be created with calling line ID (CLID) or dialed number identification service (DNIS) attribute values. The CLID or DNIS attribute values can be associated with the RADIUS record that is sent with the user profile so that the RADIUS server can access CLID or DNIS attribute information for all incoming calls.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the "Feature Information for Enhanced Test Command" section.

Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS software image support. To access Cisco Feature Navigator, go to http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp. An account on Cisco.com is not required.

Contents

•Restrictions for the Enhanced Test Command

•How to Configure the Enhanced Test Command

•Configuration Example for Enhanced Test Command

•Additional References

•Feature Information for Enhanced Test Command

•Glossary

Restrictions for the Enhanced Test Command

The test aaa group command does not work with TACACS+.

How to Configure the Enhanced Test Command

The following sections describe how to configure the Enhanced Test Command feature:

•Configuring a User Profile and Associating it with the RADIUS Record

•Verifying the Enhanced Test Command Configuration

Configuring a User Profile and Associating it with the RADIUS Record

This section describes how to create a named user profile with CLID or DNIS attribute values and associate it with the RADIUS record.

SUMMARY STEPS

1. enable

2. configure terminal

3. aaa user profile profile-name

4. aaa attribute {dnis | clid} attribute-value

5. exit

6. test aaa group {group-name | radius} username password new-code [profile profile-name]

DETAILED STEPS

 
Command or Action
Purpose

Step 1 

enable

Example:

Router> enable

Enables privileged EXEC mode.

•Enter your password if prompted.

Step 2 

configure terminal

Example:

Router# configure terminal

Enters global configuration mode.

Step 3 

aaa user profile profile-name

Example:

Router(config)# aaa user profile profilename1

Creates a user profile.

Step 4 

aaa attribute {dnis | clid}

Example:

Router# configure terminal

Adds DNIS or CLID attribute values to the user profile and enters AAA-user configuration mode.

Step 5 

exit

Exit Global Configuration mode.

Step 6 

Router# test aaa group {group-name | radius} username password new-code [profile profile-name]

Example:

Router# test aaa group radius secret new-code profile profilename1

Associates a DNIS or CLID named user profile with the record sent to the RADIUS server.

Note The profile-name must match the profile-name specified in the aaa user profile command.

Verifying the Enhanced Test Command Configuration

To verify the Enhanced Test Command configuration, use the following commands in privileged EXEC mode:

Command
Purpose

Router# debug radius

Displays information associated with RADIUS.

Router# more system:running-config

Displays the contents of the current running configuration file. (Note that the more system:running-config command has replaced the show running-config command.)


Configuration Example for Enhanced Test Command

This section provides the following configuration example:

•User Profile Associated With a test aaa group command: Example

User Profile Associated With a test aaa group command: Example

The following example shows how to configure the dnis = dnisvalue user profile "prfl1" and associate it with a test aaa group command. In this example, the debug radius command has been enabled and the output follows the configuration. 

aaa user profile prfl1

  aaa attribute dnis

  aaa attribute dnis dnisvalue

  no aaa attribute clid

! Attribute not found.

  aaa attribute clid clidvalue

  no aaa attribute clid 

  exit

!

! Associate the dnis user profile with the test aaa group command.

test aaa group radius user1 pass new-code profile profl1

!

!

!

! debug radius output, which shows that the dnis value has been passed to the radius 
! server.

*Dec 31 16:35:48: RADIUS: Sending packet for Unique id = 0

 *Dec 31 16:35:48: RADIUS: Initial Transmit unknown id 8 172.22.71.21:1645, 
Access-Request, len 68

 *Dec 31 16:35:48: RADIUS: code=Access-Request id=08 len=0068

         authenticator=1E CA 13 F2 E2 81 57 4C - 02 EA AF 9D 30 D9 97 90

         T=User-Password[2]                 L=12 V=*

         T=User-Name[1]                     L=07 V="test"

         T=Called-Station-Id[30]            L=0B V="dnisvalue"

         T=Service-Type[6]                  L=06 V=Login                     [1]

         T=NAS-IP-Address[4]                L=06 V=10.0.1.81                 

 

 *Dec 31 16:35:48: RADIUS: Received from id 8 172.22.71.21:1645, Access-Accept, len 38

 *Dec 31 16:35:48: RADIUS: code=Access-Accept id=08 len=0038

Additional References

The following sections provide references related to Enhanced Test Command.

Related Documents

Related Topic
Document Title

Security Commands

Cisco IOS Security Command Reference


Standards

Standard
Title

None

—


MIBs

MIB
MIBs Link

None

To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs


RFCs

RFC
Title

None

—


Technical Assistance

Description
Link

The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies.

To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds.

Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.

http://www.cisco.com/techsupport


Feature Information for Enhanced Test Command

Table 1 lists the release history for this feature.

Not all commands may be available in your Cisco IOS software release. For release information about a specific command, see the command reference documentation.

Use Cisco Feature Navigator to find information about platform support and software image support. Cisco Feature Navigator enables you to determine which Cisco IOS and Catalyst OS software images support a specific software release, feature set, or platform. To access Cisco Feature Navigator, go to http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp. An account on Cisco.com is not required.

Note Table 1 lists only the Cisco IOS software release that introduced support for a given feature in a given Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS software release train also support that feature.

Table 1 Feature Information for Enhanced Test Command

Feature Name
Releases
Feature Information

Enhanced Test Command

12.2(4)T
12.2(28)SB
12.2(33)SRC

The Enhanced Test Command feature allows a named user profile to be created with calling line ID (CLID) or Dialed Number Identification Service (DNIS) attribute values. The CLID or DNIS attribute values can be associated with the RADIUS record that is sent with the user profile so that the RADIUS server can access CLID or DNIS attribute information for all incoming calls.

This feature was introduced in Cisco IOS Release 12.2(4)T.

This feature was integrated into Cisco IOS Release 12.2(28)SB.

This feature was integrated into Cisco IOS Release 12.2(33)SRC.

The following commands were introduced or modified by this feature: aaa attribute, aaa user profile, test aaa group


Glossary

attribute—RADIUS Internet Engineering Task Force (IETF) attributes are the original set of 255 standard attributes that are used to communicate AAA information between a client and a server. Because IETF attributes are standard, the attribute data is predefined and well known; thus all clients and servers who exchange AAA information via IETF attributes must agree on attribute data such as the exact meaning of the attributes and the general bounds of the values for each attribute.

CLID—calling line ID. CLID provides the number from which a call originates.

DNIS—dialed number identification service. DNIS provides the number that is dialed.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2001, 2006-2007 Cisco Systems, Inc. All rights reserved.