AFI--Address Family Identifier. Carries the identity of the network layer protocol that is associated with the network address.
--A link connecting two backdoor routers.
--A router that connects two or more sites, that are also connected to each other through an MPLS VPN EIGRP PE to CE links.
--Border Gateway Protocol. An interdomain routing protocol that exchanges reachability information with other BGP systems. It is defined by RFC 1163, A Border Gateway Protocol (BGP). BGP supports CIDR and uses route aggregation mechanisms to reduce the size of routing tables.
--An extended community attribute that can be inserted anywhere into the best path calculation.
--A router that belongs to a customer network, that connects to a provider edge (PE) router to utilize MPLS VPN network services.
--multiprotocol BGP. An enhanced version of BGP that carries routing information for multiple network-layer protocols and IP multicast routes. It is defined in RFC 2858, Multiprotocol Extensions for BGP-4.
--The PE router is the entry point into the service provider network. The PE router is typically deployed on the edge of the network and is administered by the service provider. The PE router is the redistribution point between EIGRP and BGP in PE to CE networking.
--A collection of routers that have well-defined exit points to other “sites.”
--A special purpose tag or attribute that identifies the site that injects a route into the network. This attribute is used for intersite filtering in MPLS VPN PE-to-CE topologies.
--Virtual Private Network. Allows IP traffic to travel securely over public TCP/IP networks and the Internet by encapsulating and encrypting all IP packets. VPN uses a tunnel to encrypt all information at the IP level.