IP Routing: BFD Configuration Guide Cisco IOS XE Release 2
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- May 4, 2011
Book Table of Contents
Notes
The Cisco software feature documentation in this configuration guide includes information about features that are in Cisco IOS XE Software releases.
For the latest feature information and caveats, see the release notes for your software release. Additionally, use Cisco Feature Navigator to find information about feature, platform, and software image support. To access Cisco Feature Navigator, go to http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.
Any Internet Protocol (IP) addresses used in this guide are not intended to be actual addresses. Any examples, configuration sample output, and figures included in this guide are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
Recommended Reading:
- About Cisco IOS XE Software Documentation
- Using the Command-Line Interface in Cisco IOS XE Software
- Cisco IOS IP Routing: Protocol-Independent Command Reference
Browse all support information for Cisco IOS XE Release, or select another product.
Complete book-level PDFs are generated periodically and therefore may not reflect the latest updates to documentation as contained in the chapter-level HTML or PDF documents.
Feedback