- Preface
- New and Changed Information
- Overview
- Configuring the Underlay
- Configuring VXLAN
- Configuring VXLAN with IPv6 in the Underlay (VXLANv6)
- Configuring VXLAN BGP EVPN
- EVPN Hybrid IRB Mode
- Default Gateway Coexistence of HSRP and Anycast Gateway (VXLAN EVPN)
- Configuring vPC Multi-Homing
- Configuring vPC Fabric Peering
- Interoperability with EVPN Multi-Homing Using ESI
- Configuring External VRF Connectivity and Route Leaking
- Configuring Seamless Integration of EVPN with L3VPN (MPLS LDP)
- Configuring Seamless Integration of EVPN with L3VPN (MPLS SR)
- Configuring Seamless Integration of EVPN with L3VPN SRv6
- Configuring Seamless Integration of EVPN (TRM) with MVPN
- Configuring VXLAN EVPN Multi-Site
- Configure VXLAN EVPN Traffic Engineering - Multi-Site Egress Load Balancing
- Configuring Tenant Routed Multicast (TRM)
- Configuring VXLAN OAM
- Configuring VXLAN QoS
- Configuring BGP EVPN Filtering
- Configuring VXLAN BGP-EVPN Null Route
- Configuring Port VLAN Mapping
- Micro-segmentation for VXLAN Fabrics Using Group Policy Option (GPO)
- Configuring Layer 4 - Layer 7 Services
- Configuring Proportional Multipath for VNF
- EVPN Distributed NAT
- DHCP relay agents in VXLAN BGP EVPN fabrics
- Configuring Cross Connect
- Configuring Bud Node
- Index
Cisco Nexus 9000 Series NX-OS VXLAN Configuration Guide, Release 10.4(x)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- March 29, 2024
Feedback