Available Languages

Updated:September 1, 2025

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Cisco Optical Network Controller (ONC) Adapter

General information

Controller name: ONC Adapter

Vendor: Cisco

Controller version: 2.1.1, 3.1, 3.2 (24.3.1)

HCO version: 10.0

Adapter version:

Adapter release date:

Use cases

· Inventory discovery - Yes

· Topology discovery - Yes

· Service underlay discovery (LSP, tunnels) - No

· Service discovery - Yes

· Assurance - No

· Service provisioning – Yes

· RON - Yes

Discovery

Inventory

Details	Support	Additional Information
Device types	Cisco NCS 1010 devices, Cisco NCS 2000 devices	IOS-XR 7.11.1, IOS-XR 7.11.2, SVO 12.3.1
Shelf	Yes
Cards	Yes
Ports	Yes
Fans	Yes
Power	Yes
Pluggable transceivers	Yes
Notifications	Yes
Protocol	RESTCONF
Data Model	TAPI

Topology

Details	Support	Additional Information
Link layers	OTS, OMS, MC and NMC (OTSiMC)	LSPs and services not to be included here
Cross links	Yes
Cross domain links	No
Notifications	No
Protocol	RESTCONF
Data Model	TAPI

Service underlay

Details	Support	Additional Information
Link layers	No
Cross domain links	No
Notifications	No
Protocol	NA
Data Model	NA

Services

Details	Support	Additional Information
Service types	OCH-NC (Wavelength)	LSPs and RON links are not included here
Service underlay	No
Cross domain services	No
Notifications	Yes
Protocol	RESTCONF
Data Model	TAPI

Assurance

Details	Support	Additional Information
PM types	Yes	Power level PM counters on all optical ports
Resource types	No	Include here LSPs and services
Live PMs	No
PM collection method	RESTCONF

Provisioning

Service type	Creation / Deletion	Modification	Brownfield
OCH-NC	Yes	No	Yes

Protocol	RESTCONF
Data Model	TAPI

Configuration

Name	Description	Default	Range
Enabled	Enable/disable the adapter.	False	Enable this option once you are ready to run the adapter.
Logging Level	The logging level at which the discovery cycle is reported in the adapter log.	INFO	DEBUG, INFO, WARNING, ERROR, CRITICAL
Adapter Properties
Polling Cycle [sec]	Poll every X seconds.	3600	[30]
Provisioning	Enable to use this adapter instance for provisioning.	True
Connection Timeout [sec]	The connection timeout.	600	[30]
Minimal interval time between data updates [sec]	The minimum time between data updates. This is the period, for example 30 seconds, during which notifications are stored in the local adapter cache, after which discovery runs on the cache. If this is set to 0 seconds (default) the discovery runs immediately.	0	[0]
Number of provisioning retries in case of Timeout	The number of times to retry provisioning in the event of a timeout.	3	[3:10]
Interval time between provisioning retries [sec]	The time between provisioning retries.	60	[0:90]
Save persistor request to disk?	Whether to save the persistor request to disk.	False
Connection Properties
Host (including protocol, port, and URL prefix)	(http\|https)://<server>[:<port>] Examples URL prefix: /crosswork/onc-tapi/ or /nbiservice/ or /onc-nbi-service/
Credentials	Credentials are defined in the “Credentials” tab of the Device Manager.
Notifications Configuration
Enabled	Should the notifications listener be initialized or not?	True
URL Sub-part	NETCONF or CONC_NETCONF CONC_NETCONF for ONC version >= 2.0	CONC_NETCONF
Stats Collection Configuration
Enabled	Whether to enable/disable statistics collection.	True
Stats Interval Polling [sec]	Poll for statistics every X seconds.	900	[300]
Hyperlinker Rules Configuration
Enabled	Whether to enable/disable the hyper linker rules. This enables you to make vendor/controller-specific objects accessible directly from the object in the Crosswork Hierarchical Controller applications such as the Network Inventory application.	False
HyperLinker Rules Interval Checking (sec)	The time between hyper linker rules checking.	600

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)

Cisco ONC Adapters