Release Notes for Cisco Smart PHY and Cisco Operations Hub 25.2
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
Cisco Smart PHY and Cisco Operations Hub, Release 25.2
Cisco Smart PHY and Cisco Operations Hub, Release 25.2
This Release Notes identifies changes and issues related to the release of Cisco Smart PHY and Cisco Operations Hub.
For more information on Cisco Smart PHY and Cisco Operations Hub, see the Related resources section.
This section provides a brief description of the new software features introduced in this release.
New software features for Cisco Smart PHY 25.2
Table 1. New software features for Cisco Smart PHY 25.2
| Product impact |
Feature |
Description |
| Ease of Use |
This feature fixes inconsistent Smart PHY DB tables data using some of the existing Smart PHY and Operations Hub capabilities. In previous Cisco Smart PHY releases, scripts were used to detect inconsistent Smart PHY DB tables data but fixing the inconsistent data was not possible. |
|
| Ease of Use |
In previous Cisco Smart PHY release, reconciliation is only supported from the cBR-8 to Smart PHY direction. This feature provides reconciliation capabilities from Smart PHY to cBR-8. With this feature you can push the config deviations to the cBR-8 router. |
|
| Ease of Use |
Latitude & longitude is configured on managed principal core. Smart PHY does not configure RPD latitude & longitude on aux-only/video CBR. |
|
| Ease of Use |
Display the Service Definition version in the reconciliation report |
The Reconciliation reports display a deviation after Service Definition config is modified but not applied (use Save instead of Save and Assign) as reconciliation is comparing cBR-8 config with the latest Service Definition. version and not the SD version currently applied to RPDs. With this feature the reconciliation report now displays RPD associated with its version as well as the latest version of Service Definition. With this feature reconciliation report now displays RPD associated with which latest version of SD version. |
This section provides a brief description of the behavior changes introduced in this release.
Modified software features for Cisco Smart PHY 25.2
There are no modified software features in the Cisco Smart PHY 25.2 release.
This table lists the resolved issues in this specific software release.
Note: This software release may contain bug fixes first introduced in other releases. To see additional information, click the bug ID to access the Cisco Bug Search Tool.
Resolved issues in Cisco Smart PHY 25.2
Table 2. Resolved issues in Cisco Smart PHY 25.2
| Bug ID |
Description |
| 'DB inconsistency: For the tasks in 'Running', Waiting', Inactive states the 'Run history' page filtering of "Partially Successful" is not working |
|
| DB Inconsistency: Duplicate task getting created when clicked on 'Schedule' twice (timing issue) with invalid date entered scenario |
|
| DB Inconsistency: The name 'Task' or 'Job' is referred in multiple places across this feature |
|
| View reconciliation detail window in core status history can't go back to previous 1/2 view window |
|
| DB Inconsistency: 'Waiting List' tasks are not running as per the scheduled 'Next Run' list |
|
| DB Inconsistency: Scheduled task remains in 'Waiting' state for ever, if 2 tasks were scheduled to run at exact same time |
|
| Unable to export Smart PHY DB |
|
| DB Inconsistency: Task is in running state for ever, if 'Core IP Address' is entered as '100.120.89 - w/o Subnetmask. |
|
| DB Inconsistency: 'View' option for failed cores takes to blank page and getting the option to 'Save to SmartPHY' |
|
| DB Inconsistency: 'Last Run Status' is not showing up in the DB inconsistency dashboard, if CORE is not Online |
|
| Opshub user password reset is not working |
|
| Inventory Page - Online filter is not resulting as expected |
|
| Exported "Status History" shows wrong date and details |
This table lists the open issues in this specific software release.
Note: This software release may contain open bugs first identified in other releases. To see additional information, click the bug ID to access the Cisco Bug Search Tool.
Open issues in Cisco Smart PHY 25.2
Table 3. Open issues in Cisco Smart PHY 25.2
| Bug ID |
Description |
| Empty page and wrong start record number after click pre-defined keyword filter |
|
| Check deviation result not diaplayed when LCHA is performed on cbr8 |
|
| Proper error message should be shown, when 'admin' user updates password to one of the old password |
|
| DB Inconsistency: SMTP configurations are lost post import of SmartPHY 25.2 DB |
|
| DB Inconsistency: Conciliation report shows empty for resumed task |
|
| latitude and Longitude section should be listed outside fiber node in deviation report |
|
| 'Provisioning Tasks' displays inconsistent counts at Overview page |
|
| DB Inconsistency: Admin should not be allowed to add a CORE to the Core IP List in Task Creation page |
|
| Deviation check status of core is not moving to 'in-progress' state and remains in 'Online' state |
|
| Save to CCAP successful but status view detail shows failed with error messages |
|
| "Resume normal Operation" is enable after check deviation is done |
The Cisco SmartPHY software must be compatible with Cisco cBR-8 and Cisco RPD software. The following table provides details of the compatible software versions:
| Supported Versions |
Supported Versions |
| Operating System |
· Mac OS 12 and later · Windows 10 and later |
| Browser |
· Mozilla Firefox Version 143 and later · Google Chrome Version 141 and later · Microsoft Edge Version 141and later |
| Cisco cBR-8 Router |
· Cisco IOS XE Dublin 17.18.1w and 17.12.1z4. |
| Cisco RPD |
· Cisco RPD 10.9.2 and 10.9.1 |
| Smart PHY Upgrade |
· You cannot upgrade older versions of Cisco SmartPHY to CiscoSmartPHY Release 25.2 using In Place Software Upgrade |
We recommend that you view the field notices for this release to see if your software or hardware platforms are affected. If you have an account at Cisco.com, you can find the field notices at http://www.cisco.com/en/US/customer/support/tsd_products_field_notice_summary.html.
If you do not have an account at Cisco.com, you can find the field notices at http://www.cisco.com/en/US/support/tsd_products_field_notice_summary.html
Note: Cisco Smart PHY is generally available for field deployment. However, we recommend that you validate and qualify Cisco Smart PHY in a limited field trial with your specific network configuration requirements in order to ensure a smoother, faster, and successful field deployment.
For information on Cisco Smart PHY, go through the following links:
- Cisco Smart PHY Install and Upgrade Guides
- Cisco Smart PHY User Guide
- Cisco Operations Hub and Smart PHY REST API Guide
- Cisco Smart PHY Other Product Documentation
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2025 Cisco Systems, Inc. All rights reserved.