The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Each AP package contains the following items:
One Catalyst IW9167EH Access Point
Ground lug kit with oxide inhibitor
One PG13.5 gland
Weatherization tape
To unpack the AP, follow these steps:
|
Step 1 |
Unpack and remove the access point and the selected mounting accessory kit from the shipping box. |
|
Step 2 |
Return the packing material to the shipping container and save it for future use. |
|
Step 3 |
Verify that you have received all items ordered. If any item is missing or damaged, contact your Cisco representative or reseller for instructions. |
Order the following accessories separately from Cisco:
AP mounting brackets
|
Cisco PID |
Description |
|---|---|
|
AIR-ACCDMK3700= |
DIN Rail Mounting Bracket |
|
AIR-ACCPMK3700= |
Pole Mounting Bracket (for 2”–3.2” diameter pole) |
|
AIR-ACCPMK3700-2= |
Pole Mounting Bracket (for 2”–16” diameter pole) |
Accessory kits
|
Cisco PID |
Description |
Usage Restrictions |
|---|---|---|
|
AIR-SFP-KIT1= |
Gland kit for SFP port (Qty: 5) |
— |
|
IW-ACC-M12ETH= |
Adapter, M12 X-code to RJ45 Ethernet connector |
Not applicable for Hazloc usage |
|
IW-ACC-M12PWR= |
Adapter, M12 4 Pin A-Code to Micro-fit power connector |
Not applicable for Hazloc usage |
|
IW-ACC-M12SPCR1= |
Spacer for M12 when using on SFP port (Qty: 5) |
Not applicable for Hazloc usage |
M12 Cables
|
Cisco PID |
Description |
|---|---|
|
CAB-PWR-M12-10= |
M12 DC power cable, 4 pins, A-Code, 10 ft |
|
CAB-RJ45-M12-10= |
M12 to RJ-45 Ethernet cable, 8 pins, X-Code, 10 ft |
|
CAB-ETHM12-M12-10= |
M12 to M12 Ethernet cable, 8 pins, X-Code, 10 ft |
RF Coaxial Adapters
|
Cisco PID |
Description |
|---|---|
|
AIR-ACC370-NF-NF= |
N(f) to N(f) RF adapter DC-11 GHz |
RF Coaxial Cables
|
Cisco PID |
Description |
|---|---|
|
CAB-L400-5-N-N= |
5 ft. LMR-400-DB, N(m)-STR to N(m)-R/A |
|
CAB-L400-5-N-NS= |
5 ft. LMR-400-DB, N(m)-STR to N(m)-STR |
|
AIR-CAB010LL-N= |
10 ft. LMR-400-DB, N(m)-STR to N(m)-STR |
|
CAB-L400-20-N-N= |
20 ft. LMR-400-DB, N(m)-STR to N(m)-RA |
|
AIR-CAB025HZ-N= |
25 ft. LMR-400-DB/FR/CMR, N(m)-STR to N(m)-RA |
|
CAB-L600-30-N-N= |
30 ft. LMR-600-DB, N(m)-STR to N(m)-RA |
|
CAB-L240-10-Q-N= |
10 ft. LMR-240-FR/CMR, N(m)-STR to QMA(m)-RA |
|
CAB-L240-15-Q-N= |
15 ft. LMR-240-FR/CMR, N(m)-STR to QMA(m)-RA |
|
CAB-L240-20-Q-N= |
20 ft. LMR-240-FR/CMR, N(m)-STR to QMA(m)-RA |
Lightning Arrestors
|
Lightning Arrestor |
Description |
|---|---|
|
CGR-LA-NF-NF= |
Lightning Arrestor kit, N(f) connectors |
|
CGR-LA-NM-NF= |
Lightning Arrestor kit, N(m) to N(f) |
|
ACC-LA-G-TM-TF= |
Lightning Arrestor kit, TNC(m) to TNC(f) for GNSS |
Power adapter and power injectors when PoE is not available
|
Power Supply |
Description |
|---|---|
|
IW-PWRADPT-MFIT4P= |
Power Adapter, AC-DC, Micro-Fit 4-Pin connector |
|
IW-PWRADPT-MFITIN= |
Power Adapter, AC-DC, Micro-Fit 4-Pin connector, India use |
|
IW-PWRINJ-60RGDMG= |
Power Injector, 60W, outdoor 5GE |
|
AIR-PWRINJ-60RGD1= |
60W outdoor rated power injector, with North America AC power plug. For more information, see the power injector data sheet. |
|
AIR-PWRINJ-60RGD2= |
60W outdoor rated power injector, International version with blunt-end cable. For more information, see the power injector data sheet. |
Feedback