This document describes common procedures for the Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) using video links.
There are no specific requirements for this document.
The information in this document is based on these software versions:
Cisco Expressway Series X8.x or higher
Cisco TelePresence Video Communication Server (VCS) X8.x or higher
Jabber 11.8.x or higher
Wireshark 2.6.8 or higher
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.
You can find the video links for each procedure described. The videos are public and can be found at https://video.cisco.com.
1. This video demonstrates the Cisco Expressway Mobile and Remote Access (MRA) configuration basics.