WAP150: Radio goes down when a third SSID is configured

Available Languages

Download Options

  • PDF     (3.0 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (44.7 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (62.1 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB5651

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

WAP150: Radio goes down when a third SSID is configured

Date Identified

March 24, 2017

Date Resolved

N/A

Products Affected

Model Firmware Version
WAP150 1.0.0.13, 1.0.1.7

Problem Description

Both 2.4 GHz and 5 Ghz radios go down after configuring a third SSID on either radio. As soon as the third SSID is removed, the radios are up and functional. The issue is present even if only one radio is enabled and multiple SSIDs are configured.

Resolution

Perform an upgrade on the WAP150 to the latest firmware release 1.1.0.5. 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco