The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The objective of this document is to explain how to enable the Bluetooth feature on the SPA525G IP Phone. The phone supports Bluetooth. The Bluetooth can be used to connect a Cell phone to the SPA525G. The SPA525G can be used as a Bluetooth Hands free for the Cell Phone; Cell Phone contacts can also be transferred to the SPA525G if that feature is provided by the Cell Phone.
• SPA 525G
Step 1. Press the Setup button on the phone. The Information and Settings menu appears.
Step 2. Use the navigation keys and scroll down to User Preferences. Press the Select softkey.
Step 3. Use the navigation keys and scroll down to Bluetooth. Press the Select softkey. The Bluetooth Configuration menu appears.
Step 4. With the Bluetooth option selected, press the Right Arrow navigation key until a blue check mark appears.
Step 5. Press the Set softkey to save the desired settings or Press the Back softkey to cancel settings and go back to the previous menu.