Configure LCD Contrast with Soft Keys on the SPA500 and SPA300 Series IP Phones

Available Languages

Download Options

  • PDF     (54.4 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (99.1 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (79.8 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 11, 2018
Document ID:SMB1928

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configure LCD Contrast with Soft Keys on the SPA500 and SPA300 Series IP Phones

Objective

The screen contrast can be adjusted to help users see the interface more clearly.

The objective of this document is to show you how to change the LCD screen contrast on SPA500 and SPA300 Series IP Phones.

Applicable Devices

• SPA300 Series
• SPA500 Series

Software Version

• v7.5.3

LCD Contrast

Step 1. Press the Setup button and choose LCD Contrast.

Step 2. Use the right  and left navigation buttons to adjust the LCD contrast to an optimal level.

Step 3. Press Save to save the settings or press Cancel to discard the settings.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco