SG350XG: Packet Size is Calculated Based on the Ingress Packet Size

Available Languages

Download Options

  • PDF     (3.7 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (47.0 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (65.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB5681

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

SG350XG: Packet Size is Calculated Based on the Ingress Packet Size

Date Identified

May 23, 2017

Date Resolved

June 12, 2017

Product Affected

Model

Firmware Version

Fixed In

SG350XG

2.2.0.x  

2.2.0.66

Problem Description

The Queue Statistics counters are not updated properly. The packet size is calculated based on the packet size on ingress although the statistics are egress statistics.

Resolution

This issue is fixed when you upgrade to the firmware version 2.2.0.66. To upgrade, click here for instructions.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco