SG350XG: Cannot View SNA Network Topology using IPv6 Address on a Windows 10 Edge

Available Languages

Download Options

  • PDF     (3.8 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (49.4 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (67.7 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB5666

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

SG350XG: Cannot View SNA Network Topology using IPv6 Address on a Windows 10 Edge

Date Identified

August 19, 2016

Date Resolved

June 5, 2017

Product Affected

Model

Firmware Version

Fixed In

SG350XG

2.2.0.x  

2.3.0.130

Problem Description

Viewing Smart Network Application (SNA) network topology on a switch fails when logging in with an IPv6 address using Microsoft Edge browser on a Windows 10.

Resolution

This issue is fixed when you upgrade to the firmware version 2.3.0.130. To upgrade, click here for instructions.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco