SNMPv3 Common Object Identifiers (OIDs) in Catalyst 1200/1300 and CBS250/350 Switches

Available Languages

Download Options

  • PDF     (179.9 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (245.3 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (154.3 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:October 30, 2023
Document ID:1698682076667143

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

kmgmt3636-snmpv3-common-oids-cbs350

Objective

The objective of this article is to provide a list of the common SNMPv3 object identifiers (OIDs) for the Catalyst 1200/1300 and CBS250/CBS350 switches.

Applicable Devices

  • CBS250 Switches
  • CBS350 Switches
  • Catalyst 1200 Switches
  • Catalyst 1300 Switches

Introduction

The Simple Network Management Protocol (SNMP) is an Internet-standard protocol used to manage devices on IP networks. The SNMP messages are used to inspect and communicate information about managed objects. SNMP uses Management Information Bases (MIBs) to store available objects in a hierarchical or tree-structured namespace that contains object identifiers (OIDs). An OID identifies the information in the MIB hierarchy that can be read or set via SNMP.

The SNMP version 3 feature provides secure access to devices by authenticating and encrypting data packets over the network.

This article provides the list of the common SNMPv3 OIDs for the Catalyst 1200/1300 and CBS250/CBS350 switches.

SNMP OIDs

MIB Object Name

OID

Value List

Description

sysDescr

1.3.6.1.2.1.1.1.0

DisplayString

System Description

entPhysicalSoftwareRev

1.3.6.1.2.1.47.1.1.1.1.10.67109120

DisplayString

The vendor-specific software revision string for the physical entity.

entPhysicalSerialNum

1.3.6.1.2.1.47.1.1.1.1.11.67109120

DisplayString

The vendor-specific serial number string for the physical entity.

entPhysicalMfgName

1.3.6.1.2.1.47.1.1.1.1.12.67109120

DisplayString

The name of the manufacturer of this physical component.

sysUpTime

1.3.6.1.2.1.1.3.0

TimeStamp

The value of sysUpTime.

rlCpuUtilDuringLastSecond

1.3.6.1.4.1.9.6.1.101.1.7.0

0 - 100

Percentage of the device CPU utilization during last second.

rlCpuUtilDuringLastMinute

1.3.6.1.4.1.9.6.1.101.1.8.0

0 - 100

Percentage of the device CPU utilization during last minute.

rlCpuUtilDuringLast5Minutes

1.3.6.1.4.1.9.6.1.101.1.9.0

0 - 100

Percentage of the device CPU utilization during last 5 minutes.

rlPhdUnitEnvParamTempSensorValue

1.3.6.1.4.1.9.6.1.101.53.15.1.10.1

EntitySensorValue

Current value for the Sensor being instrumented.

rlPhdUnitEnvParamFan1Status

1.3.6.1.4.1.9.6.1.101.53.15.1.4.1

1 - normal, 2 - warning

3 - critical, 4 - shutdown

5 - notPresent, 6 - notFunctioning

The mandatory state of the FAN 1 being instrumented.

rlPhdUnitEnvParamFan2Status

1.3.6.1.4.1.9.6.1.101.53.15.1.5.1

1 - normal, 2 - warning

3 - critical, 4 - shutdown

5 - notPresent, 6 - notFunctioning

The mandatory state of the FAN 2 being instrumented.

rlPhdUnitEnvParamFan3Status

1.3.6.1.4.1.9.6.1.101.53.15.1.6.1

1 - normal, 2 - warning

3 - critical, 4 - shutdown

5 - notPresent, 6 - notFunctioning

The mandatory state of the FAN 3 being instrumented.

rlPhdUnitEnvParamFan4Status

1.3.6.1.4.1.9.6.1.101.53.15.1.7.1

1 - normal, 2 - warning

3 - critical, 4 - shutdown

5 - notPresent, 6 - notFunctioning

The mandatory state of the FAN 4 being instrumented.

rlPhdUnitEnvParamFan5Status

1.3.6.1.4.1.9.6.1.101.53.15.1.8.1

1 - normal, 2 - warning

3 - critical, 4 - shutdown

5 - notPresent, 6 - notFunctioning

The mandatory state of the FAN 5 being instrumented.

Command

The SNMP get command is as follows:

Snmpget –v 3 –u USERNAME –a AUTH-METHOD –A “AUTH-PASSWORD” –x PRIVACY-METHOD –X “PRIV-PASSWORD” –l authPriv SWITCH-IP-ADDRESS

Example

Here is an example of the SNMP get command.

Result

The string return of CBS350-16XTS is shown here. It lists the firmware version, serial number, manufacturer, system up time, the CPU utilization for the last second, last minute, last 5 minutes, current temperaure, and fan status. This CBS350 model has three fans showing normal status. Fans 4 and 5 are not present.

Conclusion

Now you know some of the common SNMPv3 OIDs for the Catalyst 1200/1300 and CBS250/CBS350 switches.

Revision History

Revision Publish Date Comments
1.0
30-Oct-2023
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products