Virtual Assistant Support Bot in CBS220

Available Languages

Download Options

PDF (83.0 KB)
View with Adobe Reader on a variety of devices
ePub (160.1 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (138.7 KB)
View on Kindle device or Kindle app on multiple devices

Updated:November 21, 2023

Document ID:1700586319522164

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

kmgmt3635-virtual-assistant-support-bot-cbs220

Objective

The objective of this article is to go over the new Virtual Assistant support bot in CBS220 firmware version 2.0.2.12.

Applicable Devices | Software Version

CBS220 Switches | 2.0.2.12

Introduction

In CBS220 switches firmware version 2.0.2.12, the Virtual Assistant support bot has been integrated into the web user interface (UI) of the switch that allows you to directly launch it from the management window.

The Virtual Assistant support bot provides support content that you need to launch and manage your device. This includes articles, videos, data sheet, quick start guide, administration guide, link to software download page and more.

Virtual Assistant Bot

Step 1

Step 2

Make sure you have updated the firmware of your switch to version 2.0.2.12. Check out Upgrade Firmware on a Cisco Business 220 Series Switch for step-by-step instructions.

Step 3

Click the green Bot launch at the top of the screen.

This will connect directly to the bot on the internet, prompt you to authenticate if needed, and then automatically pull up the support information for the CBS220 switch.

Users will need to authenticate with a Cisco account to access the Virtual Assistant Bot.

The content in the Virtual Assistant bot will change over time and does not require updates to the switch.

Conclusion

Now you know how to access the Virtual Support bot from the UI of the CBS220 switch. Explore the content and manage your device with ease.

Revision History

Revision	Publish Date	Comments
1.0	21-Nov-2023	Initial Release