PDF(98.5 KB) View with Adobe Reader on a variety of devices
ePub(141.3 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(89.2 KB) View on Kindle device or Kindle app on multiple devices
Updated:August 18, 2017
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
DMZ Host Setup on the RV016, RV042, RV042G, and RV082 VPN Routers
A DeMilitarized Zone (DMZ) is an internal network of the organization that is made available to an untrusted network, usually the Internet. As per security DMZ falls between trusted and untrusted networks. Maintenance of the DMZ helps to improve security to the internal network of the organization. The DMZ Host is the server of the organization that is made available to provide services to clients on an untrusted network.
This document explains the steps to configure a DMZ host on RV016, RV042, RV042G, and RV082 VPN Routers.
• RV016 • RV042 • RV042G • RV082
DMZ Host Configuration
Step 1. Log in to the Router configuration utility and choose Setup > DMZ Host. The DMZ Host page opens:
Step 2. Enter the private IP address of the DMZ host in DMZ Private IP Address field.
Note: DMZ is a sub-network that is open to the public but behind the firewall. DMZ allows you to redirect packets from your WAN port IP address to a particular IP address in your LAN.
Step 3. Click Save to save the settings or click Cancel to undo the changes.