License Evaluation Period on the RV34x Series Routers Frequently Asked Questions (FAQs)

Available Languages

Download Options

  • PDF     (4.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (49.5 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (68.6 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:August 16, 2017
Document ID:SMB5539

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

License Evaluation Period on the RV34x Series Routers Frequently Asked Questions (FAQs)

Objective

Licenses are required for all Cisco products. The Cisco RV34x Series Router comes with a 90-day license evaluation period that allows you to experience the advanced security features of the router.

The objective of this article is to answer frequently asked questions about the License Evaluation Period on the RV34x Series Router.

Applicable Devices

  • RV34x Series

Software Version

  • 1.0.01.16

Frequently Asked Questions

1. When does the 90 - day countdown of the license evaluation period start? (First usage of the router? First configuration of a licensed setting? Total uptime/continuous usage?)

The 90-day countdown will start once the security feature is enabled on the router and the device has not been registered to a smart account. When you switch the security feature off, the countdown will stop. Turning it on will continue counting down.

2. Is there any method to reset the countdown?

As of now, there is no known way to reset the counter. Licensing is based on Cisco Smart Licensing. It is recommended to get familiar with Cisco Smart Licensing Terms and Conditions in general. Adherence to the Cisco Smart Licensing functionality is necessary. Click here to find out more about the licensing terminology.

3. Based on testing on some of the older firmware, it is observed that it would reset if the router was rolled back to factory defaults. Why is this no longer happening on the firmware version 1.0.01.10 and later ?

The latest firmware 1.0.01.16 is available on the Cisco Download Software page. It is not advised to roll back to old firmware as the results are not predictable.

4. I have already registered the router with the product instance token but how come the Lice nse Authorization Status says I a m still running in Evaluation Mode?

This is because you have not allocated any licenses. To take it out of evaluation mode, go to the Smart License Usage area on the router web-based utility and click Choose Licenses. View the Smart Licenses table and click Save and Authorize. This should take your router out of evaluation mode and be authorized.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco