Defect Reference ID:
February 06, 2019
inter-VLAN routing is enabled for VLAN 1 or any other VLAN created, the
Anyconnect user has access to resources.
when inter-VLAN routing is disabled, Anyconnect can access only the router
interface but not resources on this VLAN.
Enable inter-VLAN routing on respective VLANs
but if required create access rules (ACL) to restrict access between the VLANs.
To learn how to configure VLANs, visit the
article on: Configure
a Virtual Local Area Network (VLAN) Settings on an RV34x Series Router.
To learn how to configure access rules, please
see the article on: Configure
Access Rules on an RV34x Series Router.
To process escalation, click here to contact the Cisco Small Business Support Center (SBSC).
There have been updates on licensing requirements starting with version 184.108.40.206 moving forward. For details about this, click here.