Capacitive Touch LED in Cisco Video Phone 8875

Available Languages

Download Options

  • PDF     (513.5 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (536.7 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (356.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:October 3, 2022
Document ID:1664810343626108

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

kmgmt3448-capacitive-touch-led-cp-8875

Objective

The objective of this article is to go over the capacitive touch LED feature in Cisco video phone 8875.

Applicable Devices

  • Cisco Video Phone 8875

Introduction

Cisco Video Phone 8875 is a video phone with a high-definition camera, a touch screen, and is designed for video calls and meetings in work offices and home offices.

Cisco Video Phone 8875 integration with Webex enables users to join Webex meetings with one button. You do not have to worry about entering meeting IDs and passcodes, save time and join the meeting instantly.

On the front of the 8875 phone there is a capacitive touch LED button that serves several purposes. Keep reading to find out more!

Table of Contents

Capacitive Touch LED Button

Capacitive Touch LED Button.
  • The button itself will wake the phone up from sleep and return your phone to the home screen from wherever it is.
  • It also provides system feedback based off the light level and patterns.

CAP LED Behavior

Step 1

On the initial power up, as soon as the Cisco Logo is displayed on the screen, the center dot LED and the outer ring LED will turn on with 100% brightness.

On the initial power up, as soon as the Cisco Logo is displayed on the screen, the center dot LED and the outer ring LED will turn on with 100% brightness.

Step 2

The Cisco logo will disappear. The LEDs will then turn off and the phone will either begin the Day 0 setup or it will begin registration. The outer ring LED will turn on with 100% brightness with the center dot turned off.

The outer ring LED will turn on with 100% brightness with the center dot turned off.

Step 3

Once the boot is complete and the phone has registered successfully, the outer ring LED will dim to only 30% brightness.

Once the boot is complete and the phone has registered successfully, the outer ring LED will dim to only 30% brightness.

If the phone boots and the registration fail, it will turn the both the dot and the ring LED off.

If the phone boots and the registration fail, it will turn the both the dot and the ring LED off.

Step 4

When the screen goes to sleep mode, the backlight timer turns off and the LED will go into a breathing state by changing from 30% brightness to 100% brightness and back.

When the screen goes to sleep mode, the backlight timer turns off and the LED will go into a breathing state by changing from 30% brightness to 100% brightness and back.

Step 5

You can control the backlight LED time in the Webex Calling control hub or on systems not registered to Webex Calling, navigate to Admin login. Select Voice > User menu. Scroll down to the Screen section to configure the Back Light Timer.

Navigate to Admin login. Select Voice > User menu. Scroll down to the Screen section to configure the Back Light Timer.

Conclusion

There you have it! Now you know all about the capacitive touch LED feature in Cisco video phone 8875.

Revision History

Revision Publish Date Comments
1.0
03-Oct-2022
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco