Configure VLAN using Cisco Business Mobile App

Available Languages

Download Options

  • PDF     (1.0 MB)
    View with Adobe Reader on a variety of devices
  • ePub     (796.6 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (436.7 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:June 30, 2021
Document ID:1625067483271245

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

kmgmt3021-Configure-VLAN-Cisco-Business-Mobile-app

Objective

The objective of this document is to show you how to add, delete, or edit Virtual Local Area Network (VLAN) using the Cisco Business Mobile app.

Introduction

The Cisco Business Mobile app enables you to deploy and manage supported Cisco Business switches and wireless access points in your network from a mobile device.  

Using the Cisco Business Mobile app, you can add, delete, or edit VLANs with ease.

Let’s get started!

System Requirements for Cisco Business Mobile app

The Cisco Business Mobile app is supported on Apple iOS-based devices running iOS version 13.0 and above.

The following Cisco Business devices can be managed by the Cisco Business Mobile app:

  • Cisco Business 220 Series Smart Switches
  • Cisco Business 250 Series Smart Switches
  • Cisco Business 350 Series Managed Switches
  • Cisco Business 100 Series Access Points
  • Cisco Business 100 Series Mesh Extenders
  • Cisco Business 200 Series Access Points

Table of Contents

Add VLAN

Step 1

Open the Cisco Business Mobile app.

Click on the Cisco Business Mobile App.

Step 2

Click Network Settings.

Click Network Settings.

Step 3

In the Networks tab, click Add.

In the Networks tab, click Add.

Step 4

Enter Network Name, Network ID, and click Save.

Enter Network Name, Network ID, and click Save.

Step 5

Click Apply 1 Change.

Click Apply 1 Change.

If more changes are made to your Networks or Wireless settings, they can all be applied at the same time.

Edit/Delete VLAN

To edit or delete a VLAN, follow these steps.

Step 1

Navigate to Network Settings.

Navigate to Network Settings.

Step 2

In the Networks tab, click Edit.

In the Network tab, click Edit.

Step 3

Choose the VLAN you want to edit. Or, if you want to delete the VLAN, click the delete icon. In this example, vlan10 is deleted.

Choose the VLAN you want to edit. Or, if you want to delete the VLAN, click the delete icon.

Step 4

Click Save.

Click Save.

Step 5

Click Apply (n) Changes.

Click Apply (n) Changes.

n is the number of changes made that will be applied.

The changes will take a few minutes to be applied to your network.

The changes will take a few minutes to be applied to your network.

Conclusion

That’s it! You have successfully configured VLAN in your network using the Cisco Business Mobile app.

Looking for more articles on the Cisco Business Mobile application? Look no further! Click any of the tags below to be brought directly to that topic. Enjoy!

Revision History

Revision Publish Date Comments
1.0
30-Jun-2021
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products