Some Commands Are Missing on Devices when Pushing from the CLI Addon Templates after the SD-WAN Manager Upgraded to 20.15 while Devices Are Still Running 17.12

Available Languages

Download Options

  • PDF     (85.6 KB)
    View with Adobe Reader on a variety of devices
Updated:March 3, 2026
Document ID:225551

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

    Introduction

    This document explains why certain command lines defined in CLI add-on templates are no longer being pushed to SD‑WAN devices. Beginning with release 20.15, Cisco SD‑WAN adopts a new YANG model. As a result, when the SD‑WAN controller is upgraded to version 20.15 but the SD‑WAN devices remain on older software versions such as 17.12.x, some CLI add‑on template commands are no longer propagated to those devices.

    Problem

    You may observe that certain commands in the CLI add‑on templates no longer appear after upgrading the SD‑WAN controller to version 20.15 while the devices remain on version 17.12.x. The issue is resolved once the devices are upgraded to version 17.15 as well.

    Solution

    There are three options to resolve this issue:

    1. Several defects related to different CLI statements can cause this behavior. Some of these defects have workarounds that can be applied while the devices are still running the older software version. If a workaround exists for the affected CLI statement, apply the workaround and push the template again.

    2. Use a feature template instead of a CLI add‑on template.

    3. Upgrade the devices to version 17.15.

    Defect

    Affected Cli

    Workaround

    CSCwj12763 : Bug Search Tool CSCwh60190 : Bug Search Tool

    ip name-server

    ip name-server vrf <name> server-ip-list <list of servers IPs>
    ip name-server no-vrf <list of servers>

    CSCwm64335 : Bug Search Tool

    ip domain name

    Ip domain name-deprecated

    CSCwo92849 : Bug Search Tool

    ip community-list

    CSCwm44407 : Bug Search Tool

    “description” and “match ip address” in route-map


    match ip address prefix-list xyz
    match ip address 33
    description SET COMMUNITY FOR EDGE ROUTES

    match ip address prefix-list-deprecated xyz
    match ip address access-list 33
    description-deprecated SET COMMUNITY FOR EDGE ROUTES
    CSCwm07426 : Bug Search Tool

    Set community in route-map


    ip community-list standard community1 permit internet
    set community internet additive
    set origin igp

    ip community-list standard community1 permit-v1 permit-list internet
    set community community-deprecated internet additive
    set origin-v1 igp

    CSCwo69197 : Bug Search Tool

    tunnel mode ipsec ipv4

    tunnel mode ipsec ipv4-old

    CSCwj98144 : Bug Search Tool

    ip host vbond.cisco.in 10.1.1.1

    ip host vbond.cisco.in  ip-list 10.1.1.1

    CSCwj40573 : Bug Search Tool

    Permit icmp any any echo in ACL
    65 permit icmp any any echo
    CSCwo59694 : Bug Search Tool

    aaa accounting network default start-stop group tacacs-10

    aaa authentication enable default group tacacs-10 enable

    aaa authentication enable default group-deprecated tacacs-20 enable-deprecated

    CSCwn34168 : Bug Search Tool

    track <tracker-name> endpoint-tracker

    track tracked-object <tracker-name> endpoint-tracker

    CSCwo95868 : Bug Search Tool

    track 2 ip sla 2

    track tracked-object 2 ip sla 2
    CSCws30834 : Bug Search Tool

    keepalive 3 5

    keepalive-deprecated 3 5 ( waiting for the fix)
    CSCwn94547 : Bug Search Tool option 67 ip 10.1.1.1 option 67 ip-deprecated 10.1.1.1
    CSCws71815 : Bug Search Tool Behaviour change for "ip dhcp use class" command on sd-wan router ip dhcp use class" command is by default enable on 17.15.x while disabled on 17.12.x or below versions
    Cisco bug ID CSCwq57296 : Bug Search Tool server-private server-private-old

    Revision History

    Revision Publish Date Comments
    1.0
    03-Mar-2026
    Initial Release
    TAC Authored

    Contributed by Cisco Engineers

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products