Crashing thread: TcpOutEloop [0x0000XXXXXXXXXXXX] _ZN18IPv46SocketAddressC1ERK15IPv6HostAddress10PortNumber + 52 (splunkd + 0xXXXXXXX) [0x0000XXXXXXXXXXXX] _ZN20IPv46AddressIterator7getNextEP18IPv46SocketAddress10PortNumber + 405 (splunkd + 0xXXXXXXX) [0x0000XXXXXXXXXXXX] _ZN34AutoLoadBalancedConnectionStrategy17monitorDNSAddressEv + 721 (splunkd + 0xXXXXXXX) [0x0000XXXXXXXXXXXX] _ZN34AutoLoadBalancedConnectionStrategy16selectNewIndexerEv + 3101 (splunkd + 0xXXXXXXX) [0xXXXXXXXXXXXXXXXX] _ZN34AutoLoadBalancedConnectionStrategy14findConnectionEv + 89 (splunkd + 0xXXXXXXX) [0x00005591E0F8F19C] _ZN11TimeoutHeap18runExpiredTimeoutsER13MonotonicTime + 348 (splunkd + 0xXXXXXXX) [0x00005591E0EBFCC4] _ZN9EventLoop18runExpiredTimeoutsER13MonotonicTime + 36 (splunkd + 0x2D0BCC4) [0x00005591E0EC10F1] _ZN9EventLoop3runEv + 209 (splunkd + 0xXXXXXXX) [0x00005591DFF5EF0C] _ZN11Distributed11EloopRunner4mainEv + 268 (splunkd + 0xXXXXXXX) [0x00005591E0F85DBD] _ZN6Thread37_callMainAndDiscardTerminateExceptionEv + 13 (splunkd + 0xXXXXXXX) [0x00005591E0F86CB2] _ZN6Thread8callMainEPv + 178 (splunkd + 0xXXXXXXX) [0x00007FA2C0167EA5] ? (libpthread.so.0 + 0xXXXX)
00000090 74 63 70 6f 75 74 61 75 74 6f 6c 62 2d 30 00 00 |tcpoutautolb-0..| 000000a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|If this crash is present, there will be events in splunkd.log as well indicating there is a problem with the configuration:
ERROR AutoLoadBalancedConnectionStrategy [XXXXX TcpOutEloop] - Error in outputs.conf: illegal format for configured server uri="indexer.example.com:", should be of the form "HOST:PORT" (e.g. "indexer.example.com:9997" or "192.0.2.1:9997")The error above is indicating that there appears to be an issue with the servers section of the outputs it is trying to use. This is possibly a missing colon (:), a missing port number after the colon, or an extra character that doesn't belong.
splunk btool outputs list --debug | grep "server"This will print the servers listed in outputs.conf to the terminal. Review the list very carefully and find the syntax error. It should look similar this:
/opt/splunk/etc/apps/outputs_app/local/outputs.conf server = 10.0.0.1:9997,10.0.0.2:9997,10.0.0.3:9997
| Revision | Publish Date | Comments |
|---|---|---|
1.0 |
30-Sep-2026
|
Initial Release |