Quick Reference Guide to collect TAC requested outputs from Nexus switches

Available Languages

Download Options

  • PDF     (10.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (75.8 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (76.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:February 8, 2019
Document ID:214107

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

    Introduction

     This document lists the generic set of commands to collect from the Nexus switches during/after an issue for TAC cases.

    The command list can be pasted to the switch cli exactly as listed without any changes. Certain commands may error out if the corresponding features are not implemented. This is expected outcome and will not cause any issues.

    If you have proactively attached a show tech to the TAC case then you can ignore the below list.

    Nexus 3000

    The command list can be pasted to the switch cli exactly as listed without any changes. $(SWITCHNAME) will be automatically replaced with the hostname.

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file
    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexus 5000/6000

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file
    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexus 7000

    !COLLECT THESE OUTPUTS FROM THE ADMIN VDC AND THE VDC IN QUESTION.

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vdc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vdc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file

    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexus 9000

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file

    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products