Summary

• A vulnerability in the web-based messaging service interface of Cisco SD-WAN vManage Software could allow an unauthenticated, adjacent attacker to bypass authentication and authorization and modify the configuration of an affected system. To exploit this vulnerability, the attacker must be able to access an associated Cisco SD-WAN vEdge device.

  This vulnerability is due to insufficient authorization checks. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based messaging service interface of an affected system. A successful exploit could allow the attacker to gain unauthenticated read and write access to the affected vManage system. With this access, the attacker could access information about the affected vManage system, modify the configuration of the system, or make configuration changes to devices that are managed by the system.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sdw-auth-bypass-65aYqcS2

Affected Products

• Vulnerable Products

  This vulnerability affects Cisco devices if they are running a vulnerable release of Cisco SD-WAN vManage Software.

  For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

  Cisco has confirmed that this vulnerability does not affect the following products:

  • IOS XE SD-WAN Software
  • SD-WAN vBond Orchestrator Software
  • SD-WAN vEdge Cloud Routers
  • SD-WAN vEdge Routers
  • SD-WAN vSmart Controller Software

Workarounds

• There are no workarounds that address this vulnerability.

Fixed Software

• Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:
  https://www.cisco.com/c/en/us/products/end-user-license-agreement.html

  Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.

  When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Customers Without Service Contracts

  Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

  Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.

  Fixed Releases

  Customers are advised to upgrade to an appropriate fixed software release as indicated in the following table(s). To ensure a complete upgrade solution, consider that this advisory is part of a collection that includes the following advisories:

  • cisco-sa-sd-wan-vmanage-4TbynnhZ: Cisco SD-WAN vManage Software Vulnerabilities
  • cisco-sa-sdw-auth-bypass-65aYqcS2: Cisco SD-WAN vManage Software Authentication Bypass Vulnerability
  • cisco-sa-sdwan-dos-Ckn5cVqW: Cisco SD-WAN Software vDaemon Denial of Service Vulnerability
  • cisco-sa-sdwan-buffover-MWGucjtO: Cisco SD-WAN vEdge Software Buffer Overflow Vulnerabilities

   

  Cisco SD-WAN vManage Software Release	First Fixed Release for This Vulnerability	First Fixed Release for All Vulnerabilities Described in the Collection of Advisories
  Earlier than 18.4	Migrate to a fixed release.	Migrate to a fixed release.
  18.4	Migrate to a fixed release.	Migrate to a fixed release.
  19.2	Migrate to a fixed release.	Migrate to a fixed release.
  19.3	Migrate to a fixed release.	Migrate to a fixed release.
  20.1	Migrate to a fixed release.	Migrate to a fixed release.
  20.3	20.3.1	Migrate to a fixed release.
  20.4	20.4.1	20.4.1
  20.5	20.5.1	20.5.1

Exploitation and Public Announcements

• The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• This vulnerability was found during internal security testing by Andrew Kim of Cisco Advanced Security Initiatives Group (ASIG).

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sdw-auth-bypass-65aYqcS2

Revision History

• Version	Description	Section	Status	Date
  1.0	Initial public release.	—	Final	2021-MAY-05

  Show Less

---