Summary

• Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device.

  The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user.

  Cisco has released software updates that address the vulnerabilities described in this advisory. There are no workarounds that address these vulnerabilities.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-m4FEEGWX

Affected Products

• Vulnerable Products

  These vulnerabilities affects all releases of the following Cisco products if they are running a vulnerable software release:

  • RV110W Wireless-N VPN Firewall
  • RV130 VPN Router
  • RV130W Wireless-N Multifunction VPN Router
  • RV215W Wireless-N VPN Router

  The web-based management interface of these devices is available through a local LAN connection or the remote management feature. By default, the remote management feature is disabled for these devices.

  To determine whether the remote management feature is enabled for a device, administrators can open the web-based management interface and choose Basic Settings > Remote Management. If the Enable box is checked, remote management is enabled for the device.

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by these vulnerabilities.

Workarounds

• There are no workarounds that address these vulnerabilities. Disabling the remote management feature, if not required, would help to reduce the attack surface of these vulnerabilities.

Fixed Software

• Cisco has released free software updates that address the vulnerabilities described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html

  Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.

  When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Customers Without Service Contracts

  Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

  Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.

  Fixed Releases

  Cisco fixed these vulnerabilities in the following firmware releases:

  • RV110W Wireless-N VPN Firewall: 1.2.2.8
  • RV130 VPN Router: 1.0.3.55
  • RV130W Wireless-N Multifunction VPN Router: 1.0.3.55
  • RV215W Wireless-N VPN Router: 1.3.1.7

  To download the software from the Software Center on Cisco.com, do the following:

  RV110W and RV215W

  1. Choose Browse All.
  2. Choose Routers > Small Business Routers > Small Business RV Series Routers > RV110W Wireless-N VPN Firewall or RV215W Wireless-N VPN Router > Wireless Router Firmware.
  3. Access releases by using the left pane of the RV110W Wireless-N VPN Firewall or RV215W Wireless-N VPN Router page.

  RV130

  1. Choose Browse All.
  2. Choose Routers > Small Business Routers > Small Business RV Series Routers > RV130 VPN Router > Small Business Router Firmware.
  3. Access releases by using the left pane of the RV130 VPN Router page.

  RV130W

  1. Choose Browse All.
  2. Choose Routers > Small Business Routers > Small Business RV Series Routers > RV130W Wireless-N Multifunction VPN Router > Small Business Router Firmware.
  3. Access releases by using the left pane of the RV130W Wireless-N Multifunction VPN Router page.

Exploitation and Public Announcements

• The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerabilities that are described in this advisory.

Source

• Cisco would like to thank Quentin Kaiser for reporting these vulnerabilities.

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-m4FEEGWX

Revision History

• Version	Description	Section	Status	Date
  1.0	Initial public release.	—	Final	2020-JUL-15

  Show Less

---