Summary

• A vulnerability in the web-based management interface of Cisco Mobility Express Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system.

  The vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected device. An attacker could exploit this vulnerability by persuading a user with an active session on an affected device to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions, including modifying the configuration, with the privilege level of the user.

  Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-mob-exp-csrf-b8tFec24

  This advisory is part of the April 2020 Cisco Aironet AP, Mobility Express, and WLC Software Security Advisory Bundled Publication, which includes four Cisco Security Advisories that describe four vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: April 2020 Cisco Aironet AP, Mobility Express and WLC Software Security Advisory Bundled Publication.

Affected Products

• Vulnerable Products

  This vulnerability affects the following Cisco products if they are running a vulnerable release of Cisco Mobility Express Software:

  • Aironet 1540 Series Access Points
  • Aironet 1560 Series Access Points
  • Aironet 1800 Series Access Points
  • Aironet 2800 Series Access Points
  • Aironet 3800 Series Access Points
  • Aironet 4800 Series Access Points
  • Catalyst IW6300 Access Points
  • 6300 Embedded Services Access Points

  For more information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

  Cisco has confirmed that this vulnerability does not affect Cisco Catalyst 9100 Series Access Points.

Workarounds

• There are no workarounds that address this vulnerability.

Fixed Software

• Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license: https://www.cisco.com/c/en/us/products/end-user-license-agreement.html

  Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.

  When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.

  In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

  Customers Without Service Contracts

  Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC: https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

  Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.

  Fixed Releases

  In the following table, the left column lists Cisco software releases. The center column indicates whether a release is affected by the vulnerability described in this advisory and the first release that includes the fix for this vulnerability. The right column indicates whether a release is affected by all the vulnerabilities described in this bundle of advisories and which release includes fixes for those vulnerabilities.

  Cisco Mobility Express Major Software Release	First Fixed Release for This Vulnerability	Recommended Release for All Vulnerabilities Described in This Bundle of Advisories
  8.0 and earlier	Not vulnerable1	Not vulnerable1
  8.1	8.8.130.0	8.5.161.02
  8.2	8.8.130.0	8.5.161.02
  8.3	8.8.130.0	8.5.161.02
  8.4	8.8.130.0	8.5.161.02
  8.5	8.8.130.0	8.5.161.02
  8.6	8.8.130.0	8.8.130.0
  8.7	8.8.130.0	8.8.130.0
  8.8	8.8.130.0	8.8.130.0
  8.9	8.10.105.0	8.10.121.0
  8.10	8.10.105.0	8.10.121.0

  1. Mobility Express is not supported in releases 8.0 and earlier.
  2. If the deployment is based on a Mobility Express controller, Cisco recommends migrating to Release 8.8.130.0.

Exploitation and Public Announcements

• The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• This vulnerability was found during internal security testing.

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-mob-exp-csrf-b8tFec24

Revision History

• Version	Description	Section	Status	Date
  1.1	Updated first fixed release for releases 8.9 and 8.10.	Fixed Releases	Final	2020-APR-20
  1.0	Initial public release.	—	Final	2020-APR-15

  Show Less

---