Cisco Security Advisory
Click Icon to Copy Verbose Score
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H/E:X/RL:X/RC:X
-
Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit these vulnerabilities, the attacker must have valid administrative credentials.
For more information about these vulnerabilities, see the Details section of this advisory.
Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-rce-se7bYU57This advisory is part of a group of advisories. For a complete list of the advisories and links to them, see Cisco Advance Notification for Publication of September 16, 2026, Security Advisories. In addition, for further documentation of improvements and fixes in Cisco Identity Services Engine, see Cisco Identity Services Engine Security Hardening Release: September 2026.
-
Vulnerable Products
These vulnerabilities affect Cisco ISE, regardless of device configuration.
For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products section of this advisory are known to be affected by these vulnerabilities.
Cisco has confirmed that these vulnerabilities do not affect Cisco ISE Passive Identity Connector (ISE-PIC).
-
The vulnerabilities are not dependent on one another. Exploitation of one of the vulnerabilities is not required to exploit another vulnerability. In addition, a software release that is affected by one of the vulnerabilities may not be affected by the other vulnerabilities.
Details about the vulnerabilities are as follows:
CVE-2026-20307: Cisco ISE Remote Code Execution Vulnerability
A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have at least low-privileged administrative credentials.
This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
Bug ID(s): CSCws25575
CVE ID: CVE-2026-20307
Security Impact Rating (SIR): Critical
CVSS Base Score: 9.9
CVSS Vector: CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:HCVE-2026-20176: Cisco ISE Remote Code Execution Vulnerability
A vulnerability in Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid high-privileged administrative credentials.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain system-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a DoS condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
Bug ID(s): CSCwu26102
CVE ID: CVE-2026-20176
Security Impact Rating (SIR): Critical
CVSS Base Score: 9.1
CVSS Vector: CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:HCVE-2026-20211: Cisco ISE Remote Code Execution Vulnerability
A vulnerability in Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid high-privileged administrative credentials.
This vulnerability is due to insecure deserialization of Java objects by the affected software. An attacker could exploit this vulnerability by sending a crafted serialized Java object to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a DoS condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
Bug ID(s): CSCwu59400
CVE ID: CVE-2026-20211
Security Impact Rating (SIR): Critical
CVSS Base Score: 9.1
CVSS Vector: CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H
-
There are no workarounds that address these vulnerabilities.
-
Cisco considers any workarounds and mitigations (if applicable) to be temporary solutions until an upgrade to a fixed software release is available. To remediate these vulnerabilities and avoid future exposure as described in this advisory, Cisco strongly recommends that customers upgrade to the fixed software indicated in this advisory.
Fixed Releases
In the following table, the left column lists Cisco software releases. The other three columns indicate whether a release is affected by the vulnerabilities that are described in this advisory and the first release that includes the fix for these vulnerabilities. Customers are advised to upgrade to an appropriate fixed software release as indicated in this section.
Cisco ISE Release First Fixed Release for
CVE-2026-20307First Fixed Release for
CVE-2026-20211First Fixed Release for
CVE-2026-20176Earlier than 3.1 Migrate to a fixed release. Migrate to a fixed release. Not vulnerable. 3.1 3.1 Patch 12 3.1 Patch 12 Not vulnerable. 3.2 3.2 Patch 11 3.2 Patch 11 3.2 Patch 11 3.3 3.3 Patch 12 3.3 Patch 12 3.3 Patch 12 3.4 3.4 Patch 7 3.4 Patch 7 3.4 Patch 7 3.5 3.5 Patch 3 3.5 Patch 4 3.5 Patch 4 For instructions on upgrading a device, see the Upgrade Guides on the Cisco Identity Service Engine support page.
The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.
-
The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerabilities that are described in this advisory.
-
CVE-2026-20307: Cisco would like to thank Jasper Westerman, Yanick de Pater, and Harm Blankers of REQON B.V. for reporting this vulnerability.
CVE-2026-20176 and CVE-2026-20211: Cisco would like to thank Jonathan Lein of TrendAI Research for reporting these vulnerabilities.
CVE-2026-20176: Cisco would like to thank Li Jiantao and Tevel Sho of STAR Labs SG Pte. Ltd. for independently reporting this vulnerability.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
For additional information on Cisco's vulnerability management, disclosure cadence, and software patching strategy, see Cisco's Transition to a Risk-Based Vulnerability Disclosure Model.
-
Show LessVersion Description Section Status Date 1.0 Initial public release. — Final 2026-SEP-16
-
SOFTWARE DOWNLOADS AND TECHNICAL SUPPORT
The Cisco Support and Downloads page on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool. Please note that customers may download only software that was procured from Cisco directly or through a Cisco authorized reseller or partner and for which the license is still valid.
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco Technical Assistance Center (TAC). Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
When considering software upgrades, customers are advised to regularly consult the advisories for the relevant Cisco products to determine exposure and a complete upgrade solution. In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
LEGAL DISCLAIMER DETAILS
CISCO DOES NOT MAKE ANY EXPRESS OR IMPLIED GUARANTEES OR WARRANTIES OF ANY KIND, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, CISCO DOES NOT GUARANTEE THE ACCURACY OR COMPLETENESS OF THIS INFORMATION. THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
Copies or summaries of the information contained in this Security Advisory may lack important information or contain factual errors. Customers are advised to visit the Cisco Security Advisories page for the most recent version of this Security Advisory. The Cisco Product Security Incident Response Team (PSIRT) assesses only the affected and fixed release information that is documented in this advisory. See the Cisco Security Vulnerability Policy for more information.