PDF(68.0 KB) View with Adobe Reader on a variety of devices
Updated:March 29, 2007
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Cisco Systems® announces the end-of-sale and end-of life dates for the Cisco MDS 9500 Series 2500W AC Power Supply. The last day to order the Cisco MDS 9500 Series 2500W AC Power Supply is September 27, 2007. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the Cisco MDS 9500 Series 2500W AC Power Supply. Table 2 lists the product part numbers affected by this announcement.
Customers are encouraged to migrate to the Cisco MDS 9500 Series 3000W AC Power Supply. Table 2 provides relevant information for migrating to the replacement product. The replacement product provides support for any combination of the Cisco MDS 9000 Family modules.
Table 1. End-of-Life Milestones and Dates for the Cisco MDS 9500 Series 2500W AC Power Supply
End-of-Life Announcement Date
The date the document that announces the end of sale and end of life of a product is distributed to the general public.
March 29, 2007
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.
September 27, 2007
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.
December 26, 2007
End of Routine Failure Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.
September 26, 2008
End of New Service Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
September 26, 2008
End of Service Contract Renewal Date: HW
The last date to extend or renew a service contract for the product.
December 23, 2011
Last Date of Support: HW
The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.
September 25, 2012
• HW = Hardware
• OS SW = Operating System Software
• App. SW = Application Software
Table 2. Product Part Numbers Affected by This Announcement
Customers may purchase the Cisco MDS 9124 1/2/4-Gbps 24-Port Multilayer Fabric Switch from EMC Corporation, IBM Corporation, Hitachi Data Systems, Hewlett Packard, Xiotech, Sun, Network Appliance, Dell, NEC, Fujitsu all of whom are designated Original Storage Manufacturer (OSM) or Solutions Technology Integrator (STI) partners, or from any of these companies' resellers. Cisco does not offer trade-in credits or a trade-in program.