The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
EOL13456 - Amended
Cisco announces the end-of-sale and end-of-life dates for the Cisco Unified Computing Systems R-series equipment rack & PDU. The last day to order the affected product(s) is November 20, 2020. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-life milestones and dates for the Cisco Unified Computing Systems R-series equipment rack & PDU
| Milestone |
Definition |
Date |
| End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
May 22, 2020 |
| End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
November 20, 2020 |
| Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
February 18, 2021 |
| End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
November 20, 2021 |
| End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
November 20, 2021 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
February 15, 2025 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
November 30, 2025 |
Table 2. Product part numbers affected by this announcement
| End-of-Sale Product Part Number |
Product Description |
| RACK-BLANK-001 |
Filler panels (qty 12), 1U, plastic, toolless |
| RACK-BLANK-001= |
Filler panels (qty 12), 1U, plastic, toolless |
| RACK-CBLMGT-001 |
Cable mgt D rings (qty 10), metal |
| RACK-CBLMGT-001= |
Cable mgt D rings (qty 10), metal |
| RACK-CBLMGT-003 |
TPASY,SERVER,HARDWARE,CBL MGMT, BRUSH STRIP,1,1U, SIERRA |
| RACK-CBLMGT-003= |
TPASY,SERVER,HARDWARE,CBL MGMT, BRUSH STRIP,1,1U, SIERRA |
| RACK-CBLMGT-011 |
Cable mgt straps (qty 10), Velcro |
| RACK-CBLMGT-011= |
Cable mgt straps (qty 10), Velcro |
| RACK-FASTEN-001 |
Mounting screws (qty 100), M6 |
| RACK-FASTEN-001= |
Mounting screws (qty 100), M6 |
| RACK-FASTEN-002 |
Cage nuts (qty 50), M6 |
| RACK-FASTEN-002= |
Cage nuts (qty 50), M6 |
| RACK-LOCK-002 |
DO NOT PUBLISH |
| RACK-LOCK-002= |
Door keys |
| RACK2-DOOR-001= |
Cisco R42612 front door |
| RACK2-DOOR-002= |
Cisco R42612 rear door (right, left) |
| RACK2-GRND-001 |
Cisco R42612 grounding kit |
| RACK2-GRND-001= |
Cisco R42612 grounding kit |
| RACK2-JOIN-001 |
Cisco R42612 joining kit |
| RACK2-JOIN-001= |
Cisco R42612 joining kit |
| RACK2-SIDE-001= |
Cisco R42612 side panel, set of 1 (top, bottom) |
| RACK2-UCS |
Cisco R42612 expansion rack, no side panels |
| RACK2-UCS2 |
Cisco R42612 standard rack, w/side panels |
| RACK2-UCS2-INT |
Cisco R42612 dynamic rack, w/side panels |
| RACK2-UCS2-INT= |
Cisco R42612 dynamic rack, w/side panels |
| RACK2-UCS2= |
Cisco R42612 standard rack, w/side panels |
| RACK2-UCS= |
Cisco R42612 expansion rack, no side panels |
| RP-BRKT-RETENTION |
R42612 retention bracket for 0U PDUs |
| RP-BRKT-RETENTION= |
R42612 retention bracket for 0U PDUs |
| RP208-30M1P-4-8 |
24A Metered Input 1-Phase 4x C19, 8x C13 - 1U Mount PDU |
| RP208-30M1P-4-8= |
24A Metered Input 1-Phase 4x C19, 8x C13 - 1U Mount PDU |
| RP208-30M1P-6-36 |
24A Metered Input 1-Phase 6x C19, 36x C13 - 0U PDU |
| RP208-30M1P-6-36= |
24A Metered Input 1-Phase 6x C19, 36x C13 - 0U PDU |
| RP208-30M3P-6-30 |
24A Metered Input 3-Phase 6x C19, 30x C13 - 0U PDU |
| RP208-30M3P-6-30= |
24A Metered Input 3-Phase 6x C19, 30x C13 - 0U PDU |
| RP208-60M3P-12 |
48A Metered Input 3-Phase 12x C19 - 2U Mount PDU |
| RP208-60M3P-12-9 |
48A Metered Input 3-Phase 12x C19, 9x C13 - 0U PDU |
| RP208-60M3P-12-9= |
48A Metered Input 3-Phase 12x C19, 9x C13 - 0U PDU |
| RP208-60M3P-12= |
48A Metered Input 3-Phase 12x C19 - 2U Mount PDU |
| RP230-32M1P-6-36 |
32A Metered Input 1-Phase 6x C19, 36x C13 - 0U PDU |
| RP230-32M1P-6-36= |
32A Metered Input 1-Phase 6x C19, 36x C13 - 0U PDU |
| RP230-32M3P-12-12 |
32A Metered Input 3-Phase 12x C19, 12x C13 - 0U PDU |
| RP230-32M3P-12-12= |
32A Metered Input 3-Phase 12x C19, 12x C13 - 0U PDU |
| RACK-HW-016 |
UCS 5108 Chassis Rack Shipping Bracket |
| RACK-HW-016= |
UCS 5108 Chassis Rack Shipping Bracket |
There is no replacement available for the Cisco Unified Computing Systems R-series equipment rack & PDU at this time.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at: https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase the Cisco Unified Computing Systems R-series equipment rack & PDU through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: https://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://www.cisco.com/cisco/support/notifications.html.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.